167.00 88.00 75.00
Price: £384.30 384.30

 

  • Fitting a domestic water softener will reduce scale or hardness giving you all the benefits of soft water. Scale builds up in pipes, boilers, washing machines and dishwashers. Fitting a water softener reduces this scale, saving money. A water softener will also lengthen the life of equipment, reduce scale deposits around showers and taps, make laundry feel softer and reduce the use of detergents and other chemicals. From the day you install this water softener it will reverse the scale build up from the last 20 years, removing old scale build up.
  1. Features and Benefits:
- Save money on energy bills
- Eliminate expensive maintenance bills
- Remove traces of scale in the shower, bath or sink
- Give your skin a silky clean feeling
- Make your laundry feel softer and look brighter
- Reduce the high cost of soap and detergents

(Click Additional Information For Dimentions)

 

Additional information

Price: £384.30 384.30

Fitting a domestic water softener will reduce scale or hardness giving you all the benefits of soft water. Scale builds up in pipes, boilers, washing machines and dishwashers. Fitting a water softener reduces this scale, saving money. A water softener will also lengthen the life of equipment, reduce scale deposits around showers and taps, make laundry feel softer and reduce the use of detergents and other chemicals. From the day you install this water softener it will reverse the scale build up from the last 20 years, removing old scale build up.

Features and Benefits
- Save money on energy bills
- Eliminate expensive maintenance bills
- Remove traces of scale in the shower, bath or sink
- Give your skin a silky clean feeling
- Make your laundry feel softer and look brighter
- Reduce the high cost of soap and detergents
 

(Click Additional Information For Dimentions)

Additional information


 

115.00 79.00 0.00
Price: £1,028.13 1,028.13

Crown Water Softeners produced by Harvey's Water Softeners are British made high end water softeners. Made to the highest specification and performance they offer the lowest running cost of most Non-Electric Softener. Without the need for routine servicing, it makes the total cost of ownership very attractive compared to Single Tank Electric Softeners.

This softener uses fine resin beads to speed up the regeneration cycle, its dual cylinder design cuts wastage and maintenance costs. Beads in one cylinder can self-regenerate using soft water from the other, keeping valves free of lime scale damage, while the online cylinder keeps up the continuous household supply.

Superior Salt Loading
This unit uses a purpose-designed block salt which comes in an easily handled size that's more convenient to load and store. When the block needs replacing, the unit's special sliding lid gives extra easy access.

The Silent Performer
So economical - but so effective Although this water softener is very compact, its clever side-valve design allows for maximum softening capacity. So for a system that takes up little space, works unobtrusively, needs no mains electricity supply and virtually looks after itself - it's quite a performer.

Advanced Automatic Metering
It doesn't matter how much your water consumption varies, your Softener unit won't need adjusting - even if you go on holiday. That's because the water flow is accurately measured automatically, so only the right amount of salt is used at any time.

Additional information

Features:

 

 

 

Block Salt

Easy to store, easy to handle & load.

Non-electric

Cheaper to run than electric machines. No Part P requirement for electrical outlet near the softener, no complicated timers or programmers to set up. Quiet in operation.

50 Litres per Min Flow Rate

Suitable for vented or unvented systems and up to a maximum of 2 bathrooms.

Twin Tank (Cylinders)

Never run out of soft water.

Up to 50% less salt usage.

Compact Size

Fit in a kitchen cupboard.

Displacement Metering

Only regenerates upon actual usage.

 

Technical Specifications:

 

 

 

Inlet/Outlet

3/4" bsp male parallel

Drain

3/8” Outside Diameter tube

Overflow

1/2” hose spigot

Maximum working pressure

8 bar (6 bar daytime)

Minimum working pressure

1 bar

Minimum working temperature

Protect from freezing

Salt Storage

2 x 4kg blocks

Salt used per regeneration

300g

Water used per regeneration

17 litres

Regeneration time

15 minutes

Maximum flow rate

50 Ltrs/min

Dimensions

H 490mm (19.3in) x D 460mm (18.1in) x W 212mm (8.4in)
Please allow 20mm for the elbow connections on the side of the softener


25.00 0.00 10.50
Price: £455.01 455.01

The stylish and well built British design Sapphire 10 litre Water Softener has a 10 x 17 NSF Certified Mineral Tank and uses the reliable Clack 1” Timer or Meter controlled Softener Valve. It uses 10 litres of Cation Softener resin and bsp adaptor kit. The stylish cabinet measures 34cm W x 63cm H x 59cm D fitting nicely under most kitchen sinks or other cabinets.

Why buy a Water Softener?

- Save money on energy bills (24% Saving)*
- Eliminate expensive maintenance bills
- Remove traces of scale in the shower, bath or sink - scale can give 75% reduction in flow in 18 months*
- Give your skin a silky clean feeling
- Make your laundry feel softer and look brighter
- Reduce the high cost of soap and detergents (50% Saving)*
- Compact, but still have a high capacity
- Stylish, fitting equally well into utility rooms and kitchens
- Advanced, efficient and quiet to use
- Designed to be simple to use, as well as Versatile

Time or Metered?

Metered controlled models measure the amount of water consumption and only regenerate when necessary. This saves both on salt and water used during the softener regeneration process. Time clock water softeners regenerate on a calendar which is pre-set but can easily be changed, normally every 2 or 3 days.

Additional information

 

Model 10 litre Cabinet Softener Unit
   
Valve Clack 1” Time Clock or Metered Softener Valve 
Width 34cm
Height 63cm
Depth 59cm
Service flow 0.4 m3/hr
Litres of softened water between regenerations at 300ppm hardness 1660
Average number of days between regenerations* 3 Days
Salt usage per regeneration 1.5kg

*based on a 4 people household using 160 litres/person in an area
where the water is 300ppm hard 

Installation Data 
Inlet & Outlet ¾” BSP male
Drain ¾” BSP male
Water Pressure 120 psi max, 20 psi min

 

 

 

 

 


25.00 0.00 10.50
Price: £371.88 371.88

The stylish and well built British design Sapphire 10 litre Water Softener has a 10 x 17 NSF Certified Mineral Tank and uses the reliable Clack 1” Timer or Meter controlled Softener Valve. It uses 10 litres of Cation Softener resin and bsp adaptor kit. The stylish cabinet measures 34cm W x 63cm H x 59cm D fitting nicely under most kitchen sinks or other cabinets.

Why buy a Water Softener?

- Save money on energy bills (24% Saving)*
- Eliminate expensive maintenance bills
- Remove traces of scale in the shower, bath or sink - scale can give 75% reduction in flow in 18 months*
- Give your skin a silky clean feeling
- Make your laundry feel softer and look brighter
- Reduce the high cost of soap and detergents (50% Saving)*
- Compact, but still have a high capacity
- Stylish, fitting equally well into utility rooms and kitchens
- Advanced, efficient and quiet to use
- Designed to be simple to use, as well as Versatile

Time or Metered?

Metered controlled models measure the amount of water consumption and only regenerate when necessary. This saves both on salt and water used during the softener regeneration process. Time clock water softeners regenerate on a calendar which is pre-set but can easily be changed, normally every 2 or 3 days.

Additional information

 

Model 10 litre Cabinet Softener Unit
   
Valve Clack 1” Time Clock or Metered Softener Valve 
Width 34cm
Height 63cm
Depth 59cm
Service flow 0.4 m3/hr
Litres of softened water between regenerations at 300ppm hardness 1660
Average number of days between regenerations* 3 Days
Salt usage per regeneration 1.5kg

*based on a 4 people household using 160 litres/person in an area
where the water is 300ppm hard 

Installation Data 
Inlet & Outlet ¾” BSP male
Drain ¾” BSP male
Water Pressure 120 psi max, 20 psi min

 

 

 

 

 


25.00 0.00 10.50
Price: £480.38 480.38

The stylish and well built British design Sapphire 20 litre Water Softener has a 20 x 17 NSF Certified Mineral Tank and uses the reliable Clack 1” Timer or Meter controlled Softener Valve. It uses 20 litres of Cation Softener resin and bsp adaptor kit.

Why buy a Water Softener?

- Save money on energy bills (24% Saving)*
- Eliminate expensive maintenance bills
- Remove traces of scale in the shower, bath or sink - scale can give 75% reduction in flow in 18 months*
- Give your skin a silky clean feeling
- Make your laundry feel softer and look brighter
- Reduce the high cost of soap and detergents (50% Saving)*
- Compact, but still have a high capacity
- Stylish, fitting equally well into utility rooms and kitchens
- Advanced, efficient and quiet to use
- Designed to be simple to use, as well as Versatile

Time or Metered?

Metered controlled models measure the amount of water consumption and only regenerate when necessary. This saves both on salt and water used during the softener regeneration process. Time clock water softeners regenerate on a calendar which is pre-set but can easily be changed, normally every 2 or 3 days.

Additional information

 

Model 20 litre Cabinet Softener Unit
   
Valve Clack 1” Time Clock or Metered Softener Valve 
Width 34cm
Height 81cm
Depth 59cm
Service flow 0.8 m3/hr
Litres of softened water between regenerations at 300ppm hardness 3300
Average number of days between regenerations* 6 Days
Salt usage per regeneration 3.0kg

*based on a 4 people household using 160 litres/person in an area
where the water is 300ppm hard 

Installation Data 
Inlet & Outlet ¾” BSP male
Drain ¾” BSP male
Water Pressure 120 psi max, 20 psi min

 

 

 

 

 


25.00 0.00 10.50
Price: £433.12 433.12

The stylish and well built British design Sapphire 20 litre Water Softener has a 20 x 17 NSF Certified Mineral Tank and uses the reliable Clack 1” Timer or Meter controlled Softener Valve. It uses 20 litres of Cation Softener resin and bsp adaptor kit.

Why buy a Water Softener?

- Save money on energy bills (24% Saving)*
- Eliminate expensive maintenance bills
- Remove traces of scale in the shower, bath or sink - scale can give 75% reduction in flow in 18 months*
- Give your skin a silky clean feeling
- Make your laundry feel softer and look brighter
- Reduce the high cost of soap and detergents (50% Saving)*
- Compact, but still have a high capacity
- Stylish, fitting equally well into utility rooms and kitchens
- Advanced, efficient and quiet to use
- Designed to be simple to use, as well as Versatile

Time or Metered?

Metered controlled models measure the amount of water consumption and only regenerate when necessary. This saves both on salt and water used during the softener regeneration process. Time clock water softeners regenerate on a calendar which is pre-set but can easily be changed, normally every 2 or 3 days.

Additional information

 

Model 20 litre Cabinet Softener Unit
   
Valve Clack 1” Time Clock or Metered Softener Valve 
Width 34cm
Height 81cm
Depth 59cm
Service flow 0.8 m3/hr
Litres of softened water between regenerations at 300ppm hardness 3300
Average number of days between regenerations* 6 Days
Salt usage per regeneration 3.0kg

*based on a 4 people household using 160 litres/person in an area
where the water is 300ppm hard 

Installation Data 
Inlet & Outlet ¾” BSP male
Drain ¾” BSP male
Water Pressure 120 psi max, 20 psi min

 

 

 

 

 


0.00 35.00 15.00
Price: £645.26 645.26

The stylish and well built British design Sapphire 30 litre Water Softener has a 30 x 17 NSF Certified Mineral Tank and uses the reliable Clack 1” Timer or Meter controlled Softener Valve. It uses 30 litres of Cation Softener resin and bsp adaptor kit.

Why buy a Water Softener?

- Save money on energy bills (24% Saving)*
- Eliminate expensive maintenance bills
- Remove traces of scale in the shower, bath or sink - scale can give 75% reduction in flow in 18 months*
- Give your skin a silky clean feeling
- Make your laundry feel softer and look brighter
- Reduce the high cost of soap and detergents (50% Saving)*
- Compact, but still have a high capacity
- Stylish, fitting equally well into utility rooms and kitchens
- Advanced, efficient and quiet to use
- Designed to be simple to use, as well as Versatile

Time or Metered?

Metered controlled models measure the amount of water consumption and only regenerate when necessary. This saves both on salt and water used during the softener regeneration process. Time clock water softeners regenerate on a calendar which is pre-set but can easily be changed, normally every 2 or 3 days.

Additional information

 

Model 30 litre Cabinet Softener Unit
   
Valve Clack 1” Time Clock or Metered Softener Valve 
Width 34cm
Height 109cm
Depth 59cm
Service flow 1.4 m3/hr
Litres of softened water between regenerations at 300ppm hardness 5000
Average number of days between regenerations* 10 Days
Salt usage per regeneration 4.5kg

*based on a 4 people household using 160 litres/person in an area
where the water is 300ppm hard 

Installation Data 
Inlet & Outlet ¾” BSP male
Drain ¾” BSP male
Water Pressure 120 psi max, 20 psi min

 

 

 

 

 


25.00 0.00 10.50
Price: £462.88 462.88

The stylish and well built British design Sapphire 30 litre Water Softener has a 30 x 17 NSF Certified Mineral Tank and uses the reliable Clack 1” Timer or Meter controlled Softener Valve. It uses 30 litres of Cation Softener resin and bsp adaptor kit.

Why buy a Water Softener?

- Save money on energy bills (24% Saving)*
- Eliminate expensive maintenance bills
- Remove traces of scale in the shower, bath or sink - scale can give 75% reduction in flow in 18 months*
- Give your skin a silky clean feeling
- Make your laundry feel softer and look brighter
- Reduce the high cost of soap and detergents (50% Saving)*
- Compact, but still have a high capacity
- Stylish, fitting equally well into utility rooms and kitchens
- Advanced, efficient and quiet to use
- Designed to be simple to use, as well as Versatile

Time or Metered?

Metered controlled models measure the amount of water consumption and only regenerate when necessary. This saves both on salt and water used during the softener regeneration process. Time clock water softeners regenerate on a calendar which is pre-set but can easily be changed, normally every 2 or 3 days.

Additional information

 

Model 30 litre Cabinet Softener Unit
   
Valve Clack 1” Time Clock or Metered Softener Valve 
Width 34cm
Height 109cm
Depth 59cm
Service flow 1.4 m3/hr
Litres of softened water between regenerations at 300ppm hardness 5000
Average number of days between regenerations* 10 Days
Salt usage per regeneration 4.5kg

*based on a 4 people household using 160 litres/person in an area
where the water is 300ppm hard 

Installation Data 
Inlet & Outlet ¾” BSP male
Drain ¾” BSP male
Water Pressure 120 psi max, 20 psi min