The PRISM Core grade spun is the best value option for general particulate reduction. With a recognisable mini-grooved construction, the Core DSPP has a higher surface area and enhanced dirt holding capacity over the Value DSPP. Also available in large diameter configurations , the Core DSPP-L cartridges offer even higher dirt loading potential with greater flow rate capability.

These are direct replacements for Spectrum SSP 30" Filters

 

The most popular wound cartridge media by far, the PRISM wound polypropylene offers broad chemical compatibility and good temperature resistance at low cost. With over 50 years proven experience and in a variety of micron sizes, across regular and large diameters, the DWPP provides a basic filtration solution perfectly suited for first-stage and general particulate reduction. Whilst newer spun technologies offer higher efficiency and longer life cartridges, wounds still exceed filtration standards in many applications.

These are direct replacements for Spectrum SWP Filters

The most popular wound cartridge media by far, the PRISM wound polypropylene offers broad chemical compatibility and good temperature resistance at low cost. With over 50 years proven experience and in a variety of micron sizes, across regular and large diameters, the DWPP provides a basic filtration solution perfectly suited for first-stage and general particulate reduction. Whilst newer spun technologies offer higher efficiency and longer life cartridges, wounds still exceed filtration standards in many applications.

Best Seller And Value Priced!

Trudepth cartridges from SPECTRUM are available in 3 different grades to match the wide variety of liquid applications where a broad range of particles are to be removed.

Each grade is manufactured from only FDA compliant polypropylene with no binders, resins or glues ensuring no leeching into the liquid stream. All cartridges in the TruDepth range use melt-blown technology to form their 3D micropore matrices with different fine fibres used to create a strong structure with coarser filtration on the surface and finer filtration on the inner. This gradual reduction in size allows the cartridges to be used where a wide band of pollutant sizes exist. Contaminants such as particles, dirt, debris and rust are removed by the TruDepth range to provide efficient filtration and excellent service life.

The variants in construction are reflected in each of the range’s performance. The finer fibres and deep grooves used in the Premier range for instance offer benefits in maximising the filtration surface area which increases the flow rate and lowers the pressure drop across the cartridge as well as maximising the dirt-holding capability and extending the service life. The Premier range also benefits from offering the end-cap options and WRAS approval.
 

 

With higher efficiency and a longer service life than both the Economic and Standard spun, the PSP is the most versatile and adept cartridge in the TruDepth range. The deep grooved construction significantly increases the surface area, maximising the dirt holding capacity of the cartridge whilst the integral support core increases pressure and temperature operating conditions. Available with a range of end-caps for added seal security and operator ease for fitting in multi-round housings.

 

Boasting WRAS approval over the ESP, the TruDepth Standard is the best value option for general particulate reduction. With a recognisable mini-grooved construction, the SSP has a higher surface area and enhanced dirt holding capacity over the TruDepth Economic cartridge (ESP). Also available in large diameter configurations , the SSP-BB cartridges offer even higher dirt loading potential with greater flow rate capability.

See Direct replacement for this filter (CLICK HERE)

SPECTRUM TruDepth Antimicrobial Spun Filter

Inhibiting the growth of trapped bacteria and microbes within the filter, the specialist antimicrobial spun depth cartridge prevents premature blocking from biofilm, the occurrence of unpleasant smells and the potential of unsightly water stains by utilising silver ions with antimicrobial properties.

Primarily used in private water supplies such as boreholes and well water, the AMS is also an excellent safe guard for more critical pre-filtration applications such a pre-UV treatment.

Only available in 5 micron

The Ultra grade spun from PRISM, delivers exceptional 97% efficiency, with a low clean pressure drop at an affordable price. Finer fibres used in the construction create a more accurate level of filtration, whilst maintaining a high dirt holding capacity. The DSPP-U with its melt-bonded exterior minimises any fibre migration, whilst its single, one piece, graded density and thermally bonded fibre construction made from 100% polypropylene introduces no binders, lubricants, or other additives in its manufacture.

With higher efficiency and a longer service life than both the Economic and Standard spun, the PSP is the most versatile and adept cartridge in the TruDepth range. The deep grooved construction significantly increases the surface area, maximising the dirt holding capacity of the cartridge whilst the integral support core increases pressure and temperature operating conditions. Available with a range of end-caps for added seal security and operator ease for fitting in multi-round housings.

The most popular wound cartridge media by far, the SPECTRUM wound polypropylene offers broad chemical compatibility and good temperature resistance at low cost. With over 50 years proven experience and in a variety of micron sizes, across standard and large diameters, the SWP provides a basic filtration solution perfectly suited for first-stage and general particulate reduction. Whilst newer spun technologies offer higher efficiency and longer life cartridges, wounds still exceed filtration standards in many applications.

See Direct replacement for this filter (CLICK HERE)

30" Polyester Pleated Filter (0.5 - 50 Micron) Sediment Filter

Delivering high efficiency filtration, the mono layer media of the Value Ployester Pleat delivers economical filtration with high surface area and high flow potential, whilst maintaining a low pressure drop. Vinyl plastisol end-caps eliminate the need for gaskets and maintain the integrity of the pleat pack, further supported by the tough inner polypropylene core. Resilient polyester media, used in a variety of applications from borehole and river water to harsher chemicals. For improved efficiency and classification capabilities refer to the PRISM Plus and Max Pleat lines

SPECTRUM TruDepth High Efficiency Spun Filter

The new SSP97 from SPECTRUM, delivers exceptional 97% efficiency with a low clear pressure drop at an affordable price. Finer fibres used in the construction create a more accurate level of filtration, whilst maintaining a high dirt holding capacity.

The SSP97 with its melt-bonded exterior minimises any fibre migration, whilst its single, one piece, graded density and thermally bonded fibre construction made from 100% polypropylene introduces no binders, lubricants, or other additives in its manufacture.

TruDepth High Efficiency spun cartridges from SPECTRUM are one of 4 cartridges available in the TruDepth range, alongside the Economic, Standard and Premier cartridges. Each a different grade to match the wide variety of liquid applications where a broad range of particles are to be removed.

Available in 1, 5 and 10 micron (select micron size required)

For applications with a higher operating temperature or where polypropylene is incompatible with the feed solution, the DWCO cartridge provides graded particulate reduction and is supplied as standard with a stainless steel core for added strength. Due to the natural absorption properties of the cotton media, the DWCO exhibits the ability to remove and retain dispersed oil making it suitable for use in degreasing applications.

Spectrum Pleat² 30" Polyester Sediment Filter (Choose Micron Size)

Delivering high efficiency filtration, the mono layer media of the Pleat2 delivers economical filtration with high surface area and high flow potential, whilst maintaining a low pressure drop. Vinyl plastisol end-caps eliminate the need for gaskets and maintain the integrity of the pleat pack, further supported by the tough inner polypropylene core. Resilient polyester media, used in a variety of applications from borehole and river water to harsher chemicals. For improved efficiency and classification capabilities refer to the SPECTRUM Premier Pleats.

CLICK IMAGE FOR IDENTICAL SPEC -  CHEAPER OPTION

For applications with a higher operating temperature or where polypropylene is incompatible with the feed solution, the SWC cartridge provides graded particulate reduction and is supplied as standard with a stainless steel core for added strength. Due to the natural absorption properties of the cotton media, the SWC exhibits the ability to remove and retain dispersed oil making it suitable for use in degreasing applications.

The Primary Carbon for Electroplaters

A specialised cartridge for electroplating applications, the C-155 represents the best possible technology available for the marketplace. The bonded PAC used in the Fibredyne C-155 excels in removing organics and particulate and ensures sulphur is not leached into the plating bath, along with a post filtration layer preventing carbon fines after initial flushing. The C-155 prevents pitted deposits, haze, clouds and discolouration to provide a bright electroplating finish. Building on the same technology as the discontinued ELPC cartridge, the C-155 has a reduced diameter allowing simple retrofitting to a much wider range of standard housings within the finishing industry.

The C-155 carbon cartridges made with Fibredyne™ technology are far more advanced than traditional carbon block cartridges. Benefits of higher flow rates, lower pressure drops, higher treatment capacity and less susceptibility to premature blocking from sediment make them the leading carbon cartridges on the market.

The fibres (coated in powdered activated carbon) have a very large surface area to offer increased capacity, more flow paths to allow for increased flow and reduced pressure drop and also create areas where sediment can be trapped.

The construction methods used to manufacture Fibredyne™ cartridges allow for a variety of constituents to be incorporated that solve specific application problems. Manufacturing and development processes that produce no fines or Sulphur release, is a particular benefit in electroplating applications. Fibredyne™ technology also enables the use of moulded Santoprene gaskets, meaning no glues are used and the risk of end-caps being left in the housing during cartridge change is vastly reduced.

The latest in carbon technology, Pentair Fibredyne stands for best of both worlds: a range of cartridges that combine activated carbon technology with depth filtration. This allows all the benefits of activated carbon with minimum pressure drop, thanks to using powdered activated carbon embedded in a polyethylene matrix. With premium chlorine, taste and odour reduction, the CFB-Plus is a versatile cartridge, with the highest sediment reduction promoting a long life and the ideal, trusted choice for residential, commercial or industrial applications.

The PRISM Max grade carbon block is specifically formulated for effective chloramine control and the only cartridge to offer this feature within the range. Having been manufactured within a five-stage process, this exceptional catalytic activated carbon cartridge offers up to 10 times the capacity of the Plus grade. Essential for use in public water supplies where chloramine has been added as the disinfecting agent of choice, the Max grade carbon block will typically be found within applications including aquatics and renal dialysis. Rated at one micron, pre-filtration from the PRISM spun range, such as the Plus grade DSPP at five micron, is recommended to maximise service life and prevent premature blocking.

Pentek EP-30 Carbon Block

An extension to the EPM range is the NSF 42 certified EP, offering 100% greater removal capacity for only a 10% average increase in cost.

EP Series carbon briquette cartridges are manufactured using a patented process that yields a cartridge with a nominal 5-micron filtration rating, high dirt-holding tolerance. A high porosity design helps prevent the cartridge from plugging before its adsorption capacity is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop.

These cartridges are protected by Endurawrap®, a uniquely formulated polyolefin bilaminate pre-filter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.

Available in 5", 10" (9 3/4"), 20", 30" and 40".  Please call us for volume discounts on these or any other filters