PBH Bags

For use in the PBH plastic bag housings, this range of bags proves a simple and economic solution for the removal of particulate. PBH bags are unique in design, fitting in an internal support basket to maximise the filtration surface area and are easy for operators to changeout. Available in washable nylon mesh in 50 to 600 micron and in polypropylene felt in 1 to 200 micron.

Pentek EP-5 Carbon Block

An extension to the EPM range is the NSF 42 certified EP, offering 100% greater removal capacity for only a 10% average increase in cost.

EP Series carbon briquette cartridges are manufactured using a patented process that yields a cartridge with a nominal 5-micron filtration rating, high dirt-holding tolerance. A high porosity design helps prevent the cartridge from plugging before its adsorption capacity is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop.

These cartridges are protected by Endurawrap®, a uniquely formulated polyolefin bilaminate pre-filter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.

Available in 5", 10" (9 3/4"), 20", 30" and 40".  Please call us for volume discounts on these or any other filters

PBH Bag Filters

For use in the PBH plastic bag housings, this range of bags proves a simple and economic solution for the removal of particulate. PBH bags are unique in design, fitting in an internal support basket to maximise the filtration surface area and are easy for operators to changeout.

O-Rings for Pentek PBH Housings:

O-rings can be replaced for wear and tear reasons or to allow for different materials to be chosen for compatibility issues. These are used between the head and the sump. Available in Buna-N for standard cold water applications (see Additional Information for more details).

Developed as the direct replacement to the Pentair C1, the SPECTRUM SCW is adept at removing high levels of sediment and contaminants. Employing traditional carbon wrap technology to reduce odours, remove chlorine, water pigmentation and other volatile organic compounds, the SCW combines the advantages of a high-dirt loading depth cartridge and adsorption capabilities of granular activated carbon; an ideal combination to treat drinking water.

BOX QUANTITY ONLY (x12)

Pentek EP Series Carbon Block Cartridges are manufactured using a process that yields a cartridge with a nominal 5-micron filtration rating and high dirt-holding capacity. A high porosity design helps prevent the cartridge from plugging before its adsorption capacity is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop.

These cartridges are protected by a uniquely formulated polyolefin bilaminate pre-filter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges. EP Series Cartridges make an ideal choice for a wide range of residential, food service, commercial and industrial applications.

Features & Benefits
•High dirt-holding capacity maximizes utilization of the carbon block
•Highly effective bad taste & odor and chlorine taste & odor reduction
•Nominal 5-micron rating

Pentek EPM-10 Carbon Block

The EPM range is aimed at applications where frequent changeout is required, typically batch processes and where a lower capacity cartridge suits regular routine changeouts. Extruded from bituminous, acid-washed activated powder with a medium mesh structure, the high porosity design and 10 micron filtration prevent plugging prematurely and eliminate the need for pre-filtration. EPM cartridges are NSF 42 certified and are manufactured entirely from FDA compliant materials making them an ideal choice for a wide range of applications including food service.

 

One of our top selling filters, the Pentek GAC-10 made by Pentair is a 10" Granular Activated Carbon filter for chlorine taste and odour reduction. The design, with flows from bottom to top ensures a long contact time, allowing for maximum adsorption and treatment. Using a clean, acidwashed bituminous carbon with a large mesh size, this granular range is primarily a chlorine, taste and odour reduction cartridge with the advantage of a coarse 20 micron pre and post-filter pad to retain carbon fines that is not susceptible to blockage if high particulate is present.

Will fit most 10" Pentek style housings and 3 and 4 stage RO systems.

A specialised cartridge for electroplating applications, the C-155 represents the best possible technology available for the marketplace. The bonded PAC used in the Fibredyne C-155 excels in removing organics and particulate and ensures sulphur is not leached into the plating bath, along with a post filtration layer preventing carbon fines after initial flushing. The C-155 prevents pitted deposits, haze, clouds and discolouration to provide a bright electroplating finish. Building on the same technology as the discontinued ELPC cartridge, the C-155 has a reduced diameter allowing simple retrofitting to a much wider range of standard housings within the finishing industry.

Pentek CFB-Plus 10" Modified Carbon Filter

The Pentair CFB-Plus range of modified wet moulded carbon blocks feature enhanced chlorine, taste and odour reduction with premier dirt holding capabilities. 

Powdered activated carbon is bonded to the fibres, creating an excellent sediment reduction cartridge, which combines the benefits of both a depth filter and carbon block into a single cartridge.

Certified and tested by NSF International to NSF/ANSI Standard 42 and manufactured entirely from FDA compliant materials, the CFB-Plus series is ideal for a wide  range of applications, including food service, commercial and industrial applications, as well as a variety of residential uses.

Available in 10" (9 3/4") and 20"" sizes. 

Pentek ECP 20  10" BB (Big Blue) High Flow Sediment Filter

Pentek EP-20 Carbon Block

SOLD IN BOX QUANTITY ONLY - (in increments of 6 units)

An extension to the EPM range is the NSF 42 certified EP, offering 100% greater removal capacity for only a 10% average increase in cost.

EP Series carbon briquette cartridges are manufactured using a patented process that yields a cartridge with a nominal 5-micron filtration rating, high dirt-holding tolerance. A high porosity design helps prevent the cartridge from plugging before its adsorption capacity is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop.

These cartridges are protected by Endurawrap®, a uniquely formulated polyolefin bilaminate pre-filter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.

Available in 5", 10" (9 3/4"), 20", 30" and 40".  Please call us for volume discounts on these or any other filters

The Pentek GAC-20 made by Pentair is a 20" Granular Activated Carbon filter for chlorine taste and odour reduction. The design, with flows from bottom to top ensures a long contact time, allowing for maximum adsorption and treatment. Using a clean, acidwashed bituminous carbon with a large mesh size, this granular range is primarily a chlorine, taste and odour reduction cartridge with the advantage of a coarse 20 micron pre and post-filter pad to retain carbon fines that is not susceptible to blockage if high particulate is present.

Will fit most 20" Pentek style housings.

Original Pentek QC-10GACR Quick Change 10" Water Cartridge

The Pentek Undersink Quick-Change Replacement Filter Cartridge fits any PENTEK Quick-Change Series filter heads. The filter uses Granular Activated Carbon to remove contaminants and reduce taste and odour. Lasts for up to 6 months.

• Quick-change filter cartridge with just a simple quarter turn
• Premium quality filter is made from durable material

Please note that the item is the replacement cartridge and does not include the Quick Change head assembly shown in the picture (for illustration only).

Pentek CFBC 10" Modified Carbon Filter

The CFBC uses Fibredyne technology to achieve the best in cyst and chlorine reduction with the additional advantage of sediment reduction.

Tested and certified to NSF/ANSI Standard 42, the CFBC is manufactured entirely from FDA compliant materials, ideal for food contact, residential and commercial use alike.

 

Pentek CBC-10 Carbon Block 10 inch 0.5 Micron Sediment Filter

Pentair Pentek CBC Series Cartridges are highly effective at reducing unwanted bad taste & odor and chlorine taste & odor and other contaminants from potable drinking water. CBC Series Cartridges are an ideal choice for a wide range of residential, food service, commercial and industrial applications. They also make excellent polishing filters or pre-filters in applications requiring fine filtration and high capacity.

Features and Benefits

• Reduces particles as small as 0.5 micron in size by mechanical means
• Premium high capacity bad taste & odor and chlorine taste & odor reduction
• Enhanced dirt-holding capacity

The WS series of water softening cartridges are an effective and efficient solution for point-of-use applications that benefit from ease of installation and changeouts.

Designed to trap and reduce hardness and scale deposits the WS range is an excellent solution for exact point-of-use applications. These cation exchange softening cartridges use a bed of FDA compliant insoluble resin beads to reduce hardness by replacing calcium ions for sodium ones, thereby eliminating the hardness and scale deposit buildups.

Available in three different capacities and flow rates, the convenient and space-saving design of the WS series means softened water can be provided easily and cost effectively at the exact point of need.

This 10" cartridge is designed to fit into any standard 10" housing.

The Primary Carbon for Electroplaters

A specialised cartridge for electroplating applications, the C-155 represents the best possible technology available for the marketplace. The bonded PAC used in the Fibredyne C-155 excels in removing organics and particulate and ensures sulphur is not leached into the plating bath, along with a post filtration layer preventing carbon fines after initial flushing. The C-155 prevents pitted deposits, haze, clouds and discolouration to provide a bright electroplating finish. Building on the same technology as the discontinued ELPC cartridge, the C-155 has a reduced diameter allowing simple retrofitting to a much wider range of standard housings within the finishing industry.

The C-155 carbon cartridges made with Fibredyne™ technology are far more advanced than traditional carbon block cartridges. Benefits of higher flow rates, lower pressure drops, higher treatment capacity and less susceptibility to premature blocking from sediment make them the leading carbon cartridges on the market.

The fibres (coated in powdered activated carbon) have a very large surface area to offer increased capacity, more flow paths to allow for increased flow and reduced pressure drop and also create areas where sediment can be trapped.

The construction methods used to manufacture Fibredyne™ cartridges allow for a variety of constituents to be incorporated that solve specific application problems. Manufacturing and development processes that produce no fines or Sulphur release, is a particular benefit in electroplating applications. Fibredyne™ technology also enables the use of moulded Santoprene gaskets, meaning no glues are used and the risk of end-caps being left in the housing during cartridge change is vastly reduced.

Capable of effectively reducing lead, mercury and cyst contaminants as well as an effective chlorine, taste, odour and premium grade sediment filter.

The cellulose-free fibre matrix results in higher reduction capacities that resist plugging, prolong life and feature the lowest pressure drop over the life of the cartridge. Due to the unique post filtration layer fused to the carbon/fibre matrix on all the Fibredyne family, this technology will not release fines into the effluent stream.

Manufactured entirely from FDA-compliant materials, the CFB-PB is an ideal choice for a wide range of commercial, industrial, food service and residential applications.

Fibredyne technology means that no pre-filtration is required for this 0.5 micron nominally rated filter.

Lead, mercury, cyst, chlorine, taste, odour and sediment reduction in one filter cartridge
Lead reduction capabilities of 7600 litres
Low density fibrous matrix creates greater void volume trapping more sediment without significant pressure drops
Water based manufacturing process creates ultra clean carbon, with very low extractables

Pentek EPM-20 Carbon Block

Pentair Pentek EPM Series Cartridges are a modified version of the EP Series Cartridge. An economical price makes this cartridge suitable for taste, odor and chlorine taste & odor reduction, as well as sediment filtration.

Pentek FloPlus 10" Carbon Filter

The FloPlus from Pentair uses Fibredyne technology to significantly enhance cyst, chlorine and sediment reduction.

The FloPlus™ is an NSF 53 certified cyst reduction cartridge, that functions like a nominal 10 micron cartridge. Handling extremely high flow rates (in excess of 95 lpm) with no detriment to the water quality, and delivering outstanding chlorine, taste and odour, and 99.95% cyst reduction, the FloPlus in their standard or large diameter configurations combine the advantages of a depth filter with one of the greatest life capacity, cyst-capable carbons.