John Guest Single Check Valve for 3/8 inch Push Fit Tubing - SOLD IN PACK OF 2

This Single Check Valve for 3/8" Tubing is part of the John Guest Range of Drinking Water System components –  The Super Speedfit Non-Return Valve or one way valve as it’s often called will ensure protection against the reversal of liquid flow. The valve can be mounted in any position; a moulded arrow on the body indicates the direction of flow.

Ideal for drinking water systems or coffee machines connected to a water bottle. Installed inline, it will enable you to disconnect the water bottle or other source without the water back flowing out of the pump or filter system.

It is recommended that the valve is regularly checked and maintained. To remove: Ensure collet at each end is held in whilst tubing is pulled out. Collet must be held flat against the body of the valve. Use collet Locking tools or similar.

John Guest Female Adapter 3/8 inch Tube x 1/2 inch BSP Thread - SOLD IN PACK OF 5
This Female Adaptor is part of the John Guest Range of Drinking Water System components – It fits to a standard 1/2in Thread BSP and enables the attachment of a 3/8in Drinking Water Tube.

John Guest Push-Fit Angle Stop Valve 15mm x 15mm x 3/8" Branch
This ASV4 Push Fit Angle Stop Valve 15mm x 15mm x 3/8" is part of the John Guest Range of Drinking Water System components – JG Part No. ASV4. It is an alternative fitment to the Self Piercing Saddle Valves and is suitable for both 15mm copper pipes and 15mm plastic pipes. It is easy to assemble and is also reusable.

John Guest Push Fit Angle Stop Valve 15mm x 15mm x 1/4" Branch
This ASV3 Push Fit Angle Stop Valve 15mm x 15mm x 1/4" is part of the John Guest Range of Drinking Water System components – JG Part no. ASV3. It is an alternative fitment to the Self Piercing Saddle Valves and is suitable for both 15mm copper pipes and 15mm plastic pipes. It is easy to assemble and is also reusable.

John Guest Single Check Valve for 1/4 inch Push Fit Fittings
This Single Check Valve for 1/4 inch OD Tubing is part of the John Guest Range of Drinking Water System components – JG Part No. 1/4SCV. The Super Speedfit Non-Return Valve will ensure protection against the reversal of liquid flow. The valve can be mounted in any position; a moulded arrow on the body indicates the direction of flow.

It is recommended that the valve is regularly checked and maintained.

A Set of 5 locking or unlocking tools suitable for the John Guest Pushfit range of fittings. Size range from 3/16" yo 1/2" and supplied on a handy keyring.

• 3/16"
• 1/4"
• 5/16"
• 3/8"
• 1/2"

John Guest PI1212S Bulkhead Connector 3/8 inch Push Fit x 3/8 inch Push Fit
This Bulkhead Union 3/8" by 3/8" is part of the John Guest Range of Drinking Water System components – Part No. PI1212S. It enables a tube of 3/8 inches to be safely secured through a wall.

John Guest Push-Fit Reducing Tee 3/8" x 3/8" x 1/4"
This Push Fit Reducing Tee 3/8" x 3/8" x 1/4" is part of the John Guest Range of Drinking Water System components – JG Part No. PI301208S. It allows a branch to be taken in 1/4in from 3/8in supply tube.

John Guest Female Adaptor 3/8" Tube OD x 1/2" BSP Thread Flat End
This Female Adaptor is part of the John Guest Range of Drinking Water System components – JG Part No. PI451214FS. It fits to a standard 1/2in BSP Thread – Flat End and enables the attachment of a 3/8in Drinking Water Tube.

John Guest CI320814S Female Tap Adaptor 1/4 inch Tube x 1/2 inch Thread BSP
This Female Adaptor is part of the John Guest Range of Drinking Water System components – JG Part No. CI320814S. It fits to a standard 1/2in thread BSP and enables the attachment of a 1/4in drinking water tube.

John Guest Female Connector 1/4" OD Tube x 1/4" NPTF Thread Flat End
This Female Connector is part of the John Guest Range of Drinking Water System components – JG Part No. PI450822S. It fits to a standard 1/4in NPTF Thread – Flat End and enables the attachment of a 1/4in Drinking Water Tube.

JG Speedfit Female Adaptor 3/4 inch Thread BSP x 3/8 inch Pushfit Tube
This Female Adapter 3/4" BSP Thread x 3/8" OD Pushfit Tube - is part of the John Guest Range of Drinking Water System components. It can be used to join any male 3/4in BSP Thread to a 3/8in Drinking Water Tube; such as an Appliance Valve to a 3/8" Drinking Water Tube.

Reducing Straight Coupler 15mm x 3/8" from John Guest Speedfit
This Push-Fit Reducing Straight Connector 15mm to 3/8" is part of the John Guest Quick Connect Range – JG Part No. NC2511. It is ideal for converting from one tube size to another.

John Guest Speedfit Straight Ball Shut Off Valve 3/8" x 3/8"
This Push Fit Straight Ball Isolator Valve 3/8" x 3/8" is part of the John Guest Range of Drinking Water System components – JG Part no. PPSV041212W. It offers a convenient shut off point for drinking water systems, fridges and ice makers.

John Guest Push-Fit Straight Ball Shut Off Valve 1/4" x 1/4"
This Push Fit Straight Ball Isolator Valve 1/4" x 1/4" is part of the John Guest Range of Drinking Water System components – JG Part no. PPSV040808W. It offers a convenient shut off point for drinking water systems, fridges and ice makers.

John Guest Push Fit Stem Elbow 1/4 inch x 1/4 inch
This Push Fit Stem Elbow 1/4" x 1/4" is part of the John Guest Range of Drinking Water System components. - JG Part No. CI220808W CH

JG Speedfit Adapter 3/4" BSP Female Thread x 1/4" OD Pushfit Socket
This Female Adapter 3/4" BSP Thread x 1/4" OD Pushfit Tube is part of the John Guest Range of Drinking Water System components. It can be used to join any male 3/4in BSP Thread to a 1/4in Drinking Water Tube; such as an Appliance Valve to a 1/4" Drinking Water Tube.

John Guest Reducing Stem Adapter 15mm Stem to 3/8 inch Tube
This Push Fit Stem Reducer 15mm to 3/8" is part of the John Guest Range of Drinking Water System components – JG Part No. NC2164. It allows for a 15mm Push Fit Socket or 15mm Compression fitting to be reduced to 3/8 inch tubing or connector.

John Guest Push Fit Union Tee 3/8" x 3/8" x 3/8"
This Push Fit Equal Tee 3/8" x 3/8" x 3/8" is part of the John Guest Range of Drinking Water System components – JG Part No. CI0212W CH. It allows a branch to be taken from your drinking water system to your fridge, ice-maker or coffee machine.

John Guest Push Fit Equal Tee 1/4" x 1/4" x 1/4"
This Push Fit Equal Tee 1/4" x 1/4" x 1/4" is part of the John Guest Range of Drinking Water System components – JG Part no. CI0208W CH. It allows a branch to be taken from your drinking water system to your fridge, ice-maker or coffee machine.