Wassermann Digital Meter Controlled 10 ltr Water Softener

More Views

Wassermann Digital Meter Controlled 10 ltr Water Softener
Model: WMDMC10
Meter Controlled Easy to program digital display
Automatically Learns your water usage patterns.
Economical on Salt and water
Only regenerates when needed
Compact design ideal for under sink installation
Extremely Reliable using Autotrol Logix valve.
Can be supplied with a range of Fixing Kits to suit all household systems.
5 year parts and 1 year labour warranty
Safe 12v electrical supply
Adjustable water hardness setting


The Wassermann Digital Meter Controlled 10ltr Water Softener automatically regenerates according to the amount of water you use. If your water usage increases e.g. you have guest for the weekend, the softener will automatically regenerate more frequently ensuring that your water stays soft. If you go on holiday you can program this water softener to regenerate when you return. Because this machine regenerates only when required, it is ideal for households with changing demands, saving up to 50% on salt and water usage over timed models.

This model is ideally suitable up to 3 to 4 people in a household.  Its compact design is ideal for under sink installation with an easily accessible salt bin for refilling with tablet salt. It uses the extremely reliable Autotrol Logix valve and has a quick and easy to use digital programming display to adjust the regeneration cycle when required. The control panel is also detachable should you wish to mount it elsewhere (up to 1 meter).

To ensure that your water is not only always soft but solvent free, all Wassermann Water Softeners use a purified resin that is food grade and does not contain chlorinated solvents. You can therefore rest assured that using a Wasserman system you water is always safe and solvent free.

Simple to install, this machine can be fitted by any qualified plumber or DIY enthusiast. (chooses your required installation kits below or look in Installation Kits category for more options).

H: 530mm
W: 270mm
D: 460mm

Technical specifications:
Connections Inlet/Outlet 3/4" BSP male parallel
Drain 1/2" Hose Connector
Overflow 1/2" Hose connector
Operating Parameters: Max operating Pressure 8 bar (116 p.s.i )
A 5 bar pressure limiting valve should be installed to protect the machine from excessive pressure
Min Operating Pressure 1 bar (14.5 p.s.i )
Max water temperature 30 degree C
Min water temperature Protect from freezing
Transformer-13amp/ 12V
Softener Resin volume 1x 10 litres
Salt Storage capacity 20Kg tablet salt
1706Ltr per cycle Capacity per regen at 300ppm hardness
900 gm Salt used per regeneration
65% Salt efficiency
50 litres / min peak flow at 2 bar pressure drop
30 litres / min Rated service flow at 1 bar pressure drop
76 litres Water used per Regeneration
1.9 1/ min Maximum flow rate to drain
72 Minutes Maximum Regeneration Time
< 1mg per litre Softened water hardness

Additional Information

Additional Information

Hot Water System Conventional System with Loft Tanks, Unvented Mains Fed Hot Water System
: Wassermann Digital Meter Controlled 10 ltr Water Softener
Single or Twin Tank Single Tank