4 7/8" (4 7/8"x2.5") Water Filters - Replacement Cartridges

Pentek Carbon Block Water Filter 5 Micron- 5" Length (EP-5)

(Ref:EP-5)

Price: £6.30

6.30

Buy 24 from only £6.30

Pentek EP-5 Carbon Block

An extension to the EPM range is the NSF 42 certified EP, offering 100% greater removal capacity for only a 10% average increase in cost.

EP Series carbon briquette cartridges are manufactured using a patented process that yields a cartridge with a nominal 5-micron filtration rating, high dirt-holding tolerance. A high porosity design helps prevent the cartridge from plugging before its adsorption capacity is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop.

These cartridges are protected by Endurawrap®, a uniquely formulated polyolefin bilaminate pre-filter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.

Available in 5", 10" (9 3/4"), 20", 30" and 40". Please call us for volume discounts on these or any other filters

Additional information

The Pentair EP Filters are Tested and Certified by NSF International to NSF/ANSI Standard 42 for material requirements only.

SPECTRUM Pleat² Polyester Filter 5µm 47/8" (0.5 - 50 Micron)

(Ref:SPE---)

0.00 0.00 0.00 0.00 0.00 0.00 0.00

Price: £13.00

9.70

Buy 18 from only £9.70

Spectrum Pleat² 4 7/8" Polyester Sediment Filter (Choose Micron Size)

Delivering high efficiency filtration, the mono layer media of the Pleat2 delivers economical filtration with high surface area and high flow potential, whilst maintaining a low pressure drop. Vinyl plastisol end-caps eliminate the need for gaskets and maintain the integrity of the pleat pack, further supported by the tough inner polypropylene core. Resilient polyester media, used in a variety of applications from borehole and river water to harsher chemicals. For improved efficiency and classification capabilities refer to the SPECTRUM Premier Pleats.

4 7/8" Length
Fits all 5" housings
Available in 0.5, 1, 5, 10, 20, 30 and 50 microns

Additional information

Material: Polyester
Micron: Various
Efficiency (%): 90
Length: 4 7/8"
Diameter: Regular (2.5")
End-Cap: DOE - Double Open Ended
Flow Rate (lpm): 12

Code Numbers:

SPE-005-47/8
SPE-01-47/8
SPE-05-47/8
SPE-10-47/8
SPE-20-47/8
SPE-30-47/8
SPE-50-47/8

Spun Polypropylene Filter 4 7/8" Standard Diameter - PRISM CORE RANGE

(Ref:FC-DSPP-R5-1X-C)

0.00 0.00 0.00 0.00

Price: £3.00

1.50

Buy 16 from only £2.25

Buy 32 from only £1.50

The PRISM Core grade spun is the best value option for general particulate reduction. With a recognisable mini-grooved construction, the Core DSPP has a higher surface area and enhanced dirt holding capacity over the Value DSPP. Also available in large diameter configurations , the Core DSPP-L cartridges offer even higher dirt loading potential with greater flow rate capability.

Additional information

Material: Polypropylene
Micron: 1, 5, 10, 20
Efficiency (%): 80
Length: 4 7/8"
Diameter: Regular (2.5")
End-Cap: DOE - Double Open Ended
Flow Rate (lpm): 7.5

Spun Polypropylene Filter 4 7/8" Standard Diameter - PRISM VALUE RANGE

(Ref:FC-DSPP-R5-1X-V)

0.00 0.00 0.00 0.00 0.00 0.00 0.00

Price: £2.50

1.20

Buy 16 from only £2.00

Buy 32 from only £1.20

The lowest cost spun-bonded cartridge in the PRISM range, the Value grade spun cartridge is ideally suited for batch processes where repeated change-out is required. With a graded density construction, this entry level cartridge is excellent at preventing premature blinding of other filtration systems further downstream.

Additional information

Material: Polypropylene
Micron: 1, 5, 10, 20, 50, 75, 100
Efficiency (%): 70
Length: 4 7/8"
Diameter: Regular (2.5")
End-Cap: DOE - Double Open Ended
Flow Rate (lpm): 7.5

Filter by brand

Filter by category

Connect with us