These top quality rubber hoses covered with stainless steel braiding are not only more robust than the plastic hoses but are also more flexible which is especially useful when installing in a confined space (e.g. under a kitchen sink). Virtually indistrcutable, these hoses will last for years.

For use with 15mm installations they have an elbow connection at both ends with 3/4" bsp nuts. All connections are nickel plated brass. Four washers are included with each pair of hoses.

Select lengths from 0.5m, 0.75m, 1.0m, 1.25m, or 1.5m

These top quality rubber hoses covered with stainless steel braiding are not only more robust than the plastic hoses but are also more flexible which is especially useful when installing in a confined space (e.g. under a kitchen sink). Virtually indistrcutable, these hoses will last for years.

For use with 15mm installations they have an elbow connection at one end and straight connector at the other, both with 3/4" bsp nuts. All connections are nickel plated brass. Four washers are included with each pair of hoses.

Select lengths from 0.5m, 0.75m, 1.0m, 1.25m, or 1.5m

With 3/4" Connections

These top quality rubber hoses covered with stainless steel braiding are not only more robust than the plastic hoses but are also more flexible which is especially useful when installing in a confined space (e.g. under a kitchen sink). Virtually indistrcutable, these hoses will last for years.

For use with 15mm or 22mm installations, these High Flow hoses have an elbow connection at both ends with 3/4" bsp nuts. All connections are nickel plated brass. Four washers are included with each pair of hoses.

Select lengths from 0.5m, to 2m.

With 3/4" Connections

These top quality rubber hoses covered with stainless steel braiding are not only more robust than the plastic hoses but are also more flexible which is especially useful when installing in a confined space (e.g. under a kitchen sink). Virtually indistrcutable, these hoses will last for years.

For use with 15mm or 22mm installations, these High Flow hoses have an elbow connection at one end and straight connector at the other, both with 3/4" bsp nuts. All connections are nickel plated brass. Four washers are included with each pair of hoses.

Select lengths from 0.5m, to 3m.

25mm stainless hoses - straight x bent - 1.5M

1" hoses for larger softners. These are 25mm bore with 1" connections and supplies with fibre washers.

This bracket can be used for Slimline and Standard 10in and 20in Housings. It comes complete with the relevant securing screws.

Eco 10" Big Blue Filter Housing 1" BSP Ports with wrench & bracket

The Eco 10" BB Filter Housing represents excellent value for money. This high quality housing comes in a choice of Blue or Clear bowl.

Made from Non-toxic materials which is suitable for drinking water this good quality housing is made from reinforced polypropylene.

This is a quality, heavy duty, robust housing for all applications. It accepts any 20 inch BB Wide Diameter (20" x 4.5") filter cartridge and can supply the whole house with filtered water or single drinking water tap. The Housing can be supplied with 1" or 1.5" inlet and outlet female ports and a red pressure release button.

Supplied with a robust and durable powder coated steel bracket & fixing screws for installation and specific spanner for easy filter replacement.

Liff Compatible MX1 10" Carbon Water Filter Cartridge

This Liff Compatible MX1 Carbon Water Filter designed to filter out chlorine, bad taste & odour as well as removing organic chemicals & pesticides will fit the Liff NCP1, NP1 & NDL2 units as well as any 10in cartridge housing.

Sediment removed down to 5 microns with a capacity of 10 L/Min. Life expectancy of 6 months

LIFF NSW5 Compatible 10" Spun Sediment 5 Micron Water Cartridge

The LIFF NSW5 or SW5 as it also referred to is a 10" Spun Polypropylene Sediment Cartridge used to remove sediment up to 5 microns and is compatible with NP1, NP2, NDL2 and NCP1 housing. It will also fit in most standard 10" housings.

The CBCY duplex drinking system offers a high level of filtration for drinking water. Combines the best of taste and odour control with bacteria removal. Fits easily under-sink and comes as a complete kit.

System Includes:
Self Tapping saddle Valve
Twin Housing with 1/4in Push Fit Connectors
Metal Bracket
Spanner
Short Reach Touch Control Tap
1/4" Tubing

Dimensions:
Height: 330mm
Width: 250mm

MX1 -C Filter:

• Removes Chlorine, Bad taste & odour.
• Removes Herbicides and Pesticides
• Removes Organic Materials
• Filters out Sediment to 5 Micron
  
  CY -C Filter:
• Removes bacteria, cysts and particulate matter.
• Filtration efficiency of 99.99%
• Removes particular matter, bacteria, cysts, and turbidity to a high level of efficiency from water. Removes Cryptosporidium and Giardia Cysts.

Wassermann 15mm Full Bore Fixing Kit with 19mm Stainless Steel Braided High Flow Hoses

This complete kit includes all of the fittings that you need for installing a water softener on a 15mm direct or indirect system. Supplied with high quality full bore valves and highly robust 19mm High Flow stainless steel braided hoses to ensure no rusting, safe hygienic installation and improved flow rates.

• Two 19mm (internal) x 0.75 metre braided hoses
• One 15mm full bore bypass set with built in non-return valve
• Four washers
• Five metres of 1/2" overflow/drain
• Five metres of 3/8" drain
• One plumbing out kit and some pipe clips

Wassermann 15mm Full Bore Fixing Kit with 12mm High-Flow Hoses
This complete kit includes all of the fittings that you need for installing a water softener on a 15mm direct or indirect system. Supplied with high quality full bore valves and highly robust 12mm internal diameter High Flow stainless steel braided hoses to ensure no rusting, safe hygienic installation and no loss of water pressure.

• Two 12mm (internal) x 0.75 metre braided hoses
• Four washers
• One 15mm full bore bypass set with built in non-return valve
• Two metres of 1/2" overflow/drain
• Five metres of 3/8" drain
• One plumbing out kit and some pipe clips

Wassermann 15mm Standard Fixing Kit with Stainless Steel Braided Hoses

This complete kit includes all of the fittings that you need for installing a water softener on a 15mm indirect (tank fed) system. Supplied with high quality standard valves and highly robust stainless steel braided hoses to ensure no rusting and safe hygienic installation.

If you are have a MegaFlow type system or are unsure which system you have, please select the Full Bore version (as shown in Related Products below).

• Two 12mm (internal) x 0.75 metre Stainless Steel braided hoses
• One 15mm bypass set with built in non-return valve
• Four washers
• Five metres of 1/2" overflow/drain
• Five metres of 3/8" drain
• One plumbing out kit and some pipe clips

Wassermann 15 Watt Quartz Sleeve 15WQS for Liff P15N, Liff FP20N & Stainless Steel SS15/A

Wassermann 22mm Complete Full Bore Fixing Kit with Stainless Steel Braided High Flow Hoses
This complete kit includes all of the fittings that you need for installing a water softener on a 22mm direct or indirect system. Supplied with high quality full bore valves and highly robust High Flow stainless steel braided hoses to ensure no rusting, safe hygienic installation and no loss of water pressure.

• Two 19mm (internal) x 0.75 metre stainless steel braided hoses
• 22mm full bore bypass set with built in non-return valve
• Four washers
• Two metres of 1/2" overflow hose
• Five metres of 3/8" drain hose
• One plumbing out kit and some pipe clips.
• For use with 22mm rising main
• For Combi Boilers & Mega Flow pressurised systems

Wassermann 28mm Complete Full Bore Fixing Kit with Stainless Steel Hoses
This complete kit includes all of the fittings that you need for installing a water softener on a 28mm direct or indirect system. Supplied with high quality full bore valves and highly robust High Flow stainless steel braided hoses to ensure no rusting, safe hygienic installation and no loss of water pressure.

• Two 25mm (internal) x 0.75 metre High Flow Stainless Steel braided hoses
• Two of 28mm Compression equal tees
• Three 28mm full bore valves
• One 28mm Non Return Valve
• Four washers
• Six metres of 1/2" overflow/drain hose
• One plumbing out kit and some pipe clips

Wassermann 30WQS/55WQS Quartz Sleeve for 30 & 55 Watt Units (P30N, P55N, SS30/A, SS55/A)

Wassermann 75 Watt Quartz Sleeve for SS75/A, SS1475/A & SS1575/A