0.00 0.00 0.00 0.00 0.00 0.00
0.00 0.00 0.00 0.00
Price: £120.00
90.00
Buy 9 from only £90.00

Spectrum Premier Pleat Depth Polypropylene Particle Retention Efficiency

The PPDP range is a product development on the popular SPECTRUM Premier Pleat. Designed to combine the science of depth filtration within a pleat format, this increase in layered media and cartridge construction allows for a higher dirt holding capacity over standard pleated cartridges. The PPDP is ideal for applications targeting a wider range of particulate size and those of a softer, more gelatinous form.

Additional information
PRODUCT CODES:
PPDP-1-10
PPDP-3-10
PPDP-5-10
PPDP-10-10
PPDP-20-10
PPDP-40-10
 
  • Material: Polypropylene
  • Micron: 1 to 40
  • Efficiency (%): 99
  • Length: 10"
  • Diameter: Regular (2.5")
  • End-Cap: VARIOUS
  • Seal: EPDM
  • Flow Rate (lpm): 45

0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
0.00 0.00 0.00 0.00 0.00 0.00
Price: £70.00
53.00
Buy 9 from only £53.00

Many applications benefit from using the high efficiency, large surface area, low pressure drop and inert properties of the WRAS approved Premier Pleat Polypropylene cartridge. Four pleated media layers combine to construct a pleat pack with depth characteristics and the main filtration media layer delivers high efficiency and exacting micron classification. An improved cage construction for 2018 delivers excellent flow dynamics and is designed to protect the integral pleat pack whilst providing overall rigidity and strength to the cartridge.

10" Length
Available in 0.1, 0.2 ,0.45, 1, 3, 5, 10, 20, 30, 50 and 100 microns (choose)
 

 

Additional information

Code Numbers: PPP-(micron)-(length) (end cap) (seal)

e.g. PPP-1-10AAS

Material: Polypropylene
Micron: 0.1 to 100
Efficiency (%): 96
Length: 10"
Diameter: Regular (2.5")
End-Cap: VARIOUS
Seal: Silicone
Flow Rate (lpm): 15


Each
Unit price
£ 8.00

Box of 24
Unit price
£ 6.00
You save 25%
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
Price: £8.00 8.00

The most popular wound cartridge media by far, the SPECTRUM wound polypropylene offers broad chemical compatibility and good temperature resistance at low cost. With over 50 years proven experience and in a variety of micron sizes, across standard and large diameters, the SWP provides a basic filtration solution perfectly suited for first-stage and general particulate reduction. Whilst newer spun technologies offer higher efficiency and longer life cartridges, wounds still exceed filtration standards in many applications.

Additional information
    • Material: Polypropylene
    • Micron: 10
    • Efficiency (%): 65
    • Length: 10"
    • Diameter: Regular (2.5")
    • End-Cap: DOE - Double Open Ended
    • Flow Rate (lpm): 15

 


0.00 0.00 0.00
Price: £14.00
10.00
Buy 15 from only £10.00

SPECTRUM 870 range of activated carbon block cartridges treat water by removing the bad taste, odour and appearance associated with chemical and organic pollutants

Contaminants such as chlorine, chloramine, herbicides, solvents, dyes are all treated along with the removal of organics through absorption. To satisfy the requirements of different water treatment applications, SPECTRUM 870 range includes 3 grades – Economic, Standard and Premier. Choosing the grade that is most suited to the application is influenced by the water source’s levels and types of pollutants combined with the desired purity and cartridge life.

Economic - Chlorine, chemical and organic taste, odour and appearance removal

Additional information

870 Carbon Block Economic 10" Standard

SKU: ECB -1-93/4  (1 micron)
SKU: ECB -5-93/4 (5 micron)
SKU: ECB -10-93/4 (10 micron)

Materials of Construction
Carbon Type: Acid Washed Bituminous
End Cap:Polypropylene
Gasket:Silicone (EPDM/Buna-N)
Netting:Polyethylene

Construction Notes
1. Outer polypropylene wrap extends the life of the blockby preventing premature plugging.
2. Carbon block extruded from acid washed bituminousactivated carbon.


Price: £34.44
19.21
Buy 8 from only £22.05
Buy 15 from only £19.21

10" (9/34") Standard Diameter Carbon PCB filter

Delivering the highest levels of chloramine removal with low pressure drops, the distinctive Spectrum PCB range is the new industry favourite for targeting chloramines.

The Premier Carbon Block has been designed to provide the highest level of Chloramine reduction, using a high performance carbon formulation delivering performance levels far in excess of other traditional carbon filters.

Manufactured entirely from FDA compliant material, tested and verified to NSF/ANSI Standard 42 for chlorine, taste and odour reduction, the WRAS approved Spectrum PCB deliveres outstanding performance and product reliability.

  • Renal
  • Aquatic
  • Home brewing
  • Hydroponics

Product code                     Chloramine Reduction (litres)                    Flow (IPM)                   Chlorine Reduction (Litres)                   

PCB-1-93/4-CM                15,000                                                             1.9                                 190,000

Additional information

SPECTRUM 870 Carbon Block Premier Technical Data Sheet

 

Product code                     Chloramine Reduction (litres)                    Flow (IPM)                   Chlorine Reduction (Litres)                   

PCB-1-93/4-CM                15,000                                                             1.9                                 190,000

PCB-1-20-CM                   30,000                                                             3.8                                 380,000

PCB-1-30-CM                   45,000                                                             7.6                                 570,000

PCB-1-40-CM                   60,000                                                            11.4                                760,000

PCB-1-93/4BB-CM            50,000                                                             7.6                                  950,000

PCB-1-20BB-CM               100,000                                                          15.2                                1,900,000


Price: £34.04
20.39
Buy 12 from only £20.39

Offered in both granular carbon and block options are the range of Chloramine reduction cartridges from Pentair.

Granular Carbon:

Targeting chloramines for over 250,000 litres, the CRFC-20BB radial flow design offers the benefits of granular activated carbon, whilst at the same time significantly reducing the release of carbon fines commonly associated with other granular carbon designs.

Carbon Block:

The ChlorPlus in its block configuration, reduces chloramine levels to below the guideline 0.1 ppm from a 1 ppm feed for over 26,000 litres in its standard 10" configuration. As a pre-filter in renal applications, these cartridges are the perfect choice for extending membrane life, primarily due to the absence of carbon fines, which are a common by-product of granular carbons.

Additional information

CRFC:

  • Radial flow construction allows for greater contact time and low pressure drops
  • Manufactured with 70 micron polypropylene outer shell and inner core for controlling release of carbon fines

ChlorPlus:

  • Superior chloramine and chlorine reduction capabilities
  • NSF/ANSI Standard 42 certified

Price: £260.00 260.00

Replacement Cartridge Set for EWS-10K - 8 L/M

EWS units incorporate Crystalite, an advanced Template Assisted Crystallisation (TAC) media. Crystalite media provides the first effective chemical-free scale prevention method. It converts hardness causing minerals, through a catalytic reaction, into non scaling crystals (known as soft scale), which are formed on the resin surface and then released in to water. It is highly efficient, saves money and water as no regeneration is required. Supplied with Copper Guard to protect the media from heavy metals, such as copper and iron.
Additional information
  • Technology: Water Treatment Cartridge
  • Performance: Scale Reduction
  • Material:
    Cartridge 1 - Polypropylene 5 micron
    Cartridge 2 - TAC media
  • Configuration: 10"
  • Port Size: Large Diameter (4.5")

Price: £115.00 115.00

Replacement Cartridge Set for EWS-4K - 3 L/M

EWS units incorporate Crystalite, an advanced Template Assisted Crystallisation (TAC) media. Crystalite media provides the first effective chemical-free scale prevention method. It converts hardness causing minerals, through a catalytic reaction, into non scaling crystals (known as soft scale), which are formed on the resin surface and then released in to water. It is highly efficient, saves money and water as no regeneration is required. Supplied with Copper Guard to protect the media from heavy metals, such as copper and iron.
Additional information
  • Technology: Water Treatment Cartridge
  • Performance: Scale Reduction
  • Material:
    Cartridge 1 - Polypropylene 5 micron
    Cartridge 2 - TAC media
  • Configuration: 10"
  • Port Size: Regular (2.5")

Price: £43.00
34.00
Buy 9 from only £34.00

Ion-X from SPECTRUM is an effective range of contaminant removal cartridges.

The SRSO effectively reduces calcium and magnesium hardness levels in feed water, preventing scaling that causes premature failure and increased energy costs in equipment, such as small commercial boilers and steam ovens. Large capacity cartridges can be utilised to lower total hardness levels in closed loop systems to acceptable levels

Dosing – Slowly dissolves into the filtrate to continually feed the required treatment

Additional information
  • Technology: Water Treatment Cartridge
  • Material: Media : Strong Acid Cation Resin
  • Performance: Water Softening
  • Length: 10"
  • Diameter: Regular (2.5")
  • End-Cap: DOE - Double Open Ended
  • Seal: EPDM
  • Flow Rate (lpm): 1.9

Price: £49.00 49.00

These smart SPECTRUM systems have been conveniently pre-assembled for easy and quick installation. Costing less than the sum of their individual components combined, the Aqualyze systems are anything but economic and are available in 10" and 20" Regular and Large Diameter sizes, with the unique option to select sump colour configurations. Coming complete with inlet and outlet gauges to monitor and maximise cartridge life, a spanner to assist with sump removal when performing maintenance and cartridge replacement and connectors to configure the 1/4"-1" port sizes with the most common pipework, the extensive combinations in this range provide endless options for applications and flow rates. Filtration systems are tailored to suit individual applications dependant on the level of filtration required. Single housings provide an effective one stage process, used to target specific contaminants for example, bulk solids, sediment or organics. Two-stage systems are implemented when an expensive secondary filter, such as a fine filtration or water treatment cartridge, benefits from prefiltration, prolonging service life. If applications demand a full filtration cascade, a three-stage system is recommended, which delivers a spatial and economic solution.

Additional information
  • Material: Polypropylene
  • Configuration: 1 Cartridge (L: 10" x D: 2.5")
  • Port Size: 3/8"
  • Seal:Buna
  • Temperature Rating (°C): 40
  • Max Pressure (bar): 8.6
  • Flow Rate (lpm): 25
  • End-Cap Compatibility: AA / DOE / CG

Price: £220.00
175.00
Buy 9 from only £175.00

Bubble Point 10"

The validated, integrity tested range of industry specialised beverage grade filters uses the latest technology to create a highly asymmetric, permanently hydrophilic membrane. Capable of higher throughput and with greater membrane depth capability, the new Bubble Point range extends membrane life in high loading applications. Suitable for use in many critical applications from biological filtration, through to the validated removal of spoilage microorganisms for beer, cider, wine and fruit juice classification.

The Bubble Point range uses a highly asymmetric media manufactured from the PPPES series. This modified media, with an initial increased pore diameter, significantly improves performance and durability, so it's critical for high load contaminant removal found in beverage applications.

The increased dirt holding properties of the enhanced PES pore structure, with a greater void volume, protects the validated retention layer from premature fouling as typically occurs in standard PES media. This ensures high flow rates are maintained over an extended service life.

Low protein binding characteristics coupled with the modified PES pore structure result in a cartridge that provides consistent classification without altering the final product quality, retaining desired proteins,

  • 100% integrity tested, with specific Quality Assurance Certificate supplied with every cartridge
  • Manufactured in a clean room environment, lot coded on the polypropylene cage for tracking and tracing
  • Each cartridge has double layered packaging. The inner plastic wrap is vacuum sealed and a tough outer layer provides further protection and cleanliness
  • Individually labelled and boxed for security and ease of product identification
Additional information

PRODUCT CODES:

BD10 - 0.2 micron
SM10 - 0.45 micron
SC10 - 0.65 micron
CA10 - 1.2 micron

    • Material: Polyethersulfone
    • Micron: 0.45
    • Efficiency (%): 99.99999
    • Length: 10"
    • Diameter: Regular (2.5")
    • End-Cap: QG - 222 / Closed
    • Seal: Silicone
    • Flow Rate (lpm): 15

Price: £220.00
175.00
Buy 9 from only £175.00

Bubble Point 10"

The validated, integrity tested range of industry specialised beverage grade filters uses the latest technology to create a highly asymmetric, permanently hydrophilic membrane. Capable of higher throughput and with greater membrane depth capability, the new Bubble Point range extends membrane life in high loading applications. Suitable for use in many critical applications from biological filtration, through to the validated removal of spoilage microorganisms for beer, cider, wine and fruit juice classification.

The Bubble Point range uses a highly asymmetric media manufactured from the PPPES series. This modified media, with an initial increased pore diameter, significantly improves performance and durability, so it's critical for high load contaminant removal found in beverage applications.

The increased dirt holding properties of the enhanced PES pore structure, with a greater void volume, protects the validated retention layer from premature fouling as typically occurs in standard PES media. This ensures high flow rates are maintained over an extended service life.

Low protein binding characteristics coupled with the modified PES pore structure result in a cartridge that provides consistent classification without altering the final product quality, retaining desired proteins,

  • 100% integrity tested, with specific Quality Assurance Certificate supplied with every cartridge
  • Manufactured in a clean room environment, lot coded on the polypropylene cage for tracking and tracing
  • Each cartridge has double layered packaging. The inner plastic wrap is vacuum sealed and a tough outer layer provides further protection and cleanliness
  • Individually labelled and boxed for security and ease of product identification
Additional information

PRODUCT CODES:

BD10 - 0.2 micron
SM10 - 0.45 micron
SC10 - 0.65 micron
CA10 - 1.2 micron

      • Material: Polyethersulfone
      • Micron: 0.45
      • Efficiency (%): 99.99999
      • Length: 10"
      • Diameter: Regular (2.5")
      • End-Cap: ZH - 226 / Fin
      • Seal: Silicone
      • Flow Rate (lpm): 15

Price: £220.00
175.00
Buy 9 from only £175.00

Bubble Point 10"

The validated, integrity tested range of industry specialised beverage grade filters uses the latest technology to create a highly asymmetric, permanently hydrophilic membrane. Capable of higher throughput and with greater membrane depth capability, the new Bubble Point range extends membrane life in high loading applications. Suitable for use in many critical applications from biological filtration, through to the validated removal of spoilage microorganisms for beer, cider, wine and fruit juice classification.

The Bubble Point range uses a highly asymmetric media manufactured from the PPPES series. This modified media, with an initial increased pore diameter, significantly improves performance and durability, so it's critical for high load contaminant removal found in beverage applications.

The increased dirt holding properties of the enhanced PES pore structure, with a greater void volume, protects the validated retention layer from premature fouling as typically occurs in standard PES media. This ensures high flow rates are maintained over an extended service life.

Low protein binding characteristics coupled with the modified PES pore structure result in a cartridge that provides consistent classification without altering the final product quality, retaining desired proteins,

  • 100% integrity tested, with specific Quality Assurance Certificate supplied with every cartridge
  • Manufactured in a clean room environment, lot coded on the polypropylene cage for tracking and tracing
  • Each cartridge has double layered packaging. The inner plastic wrap is vacuum sealed and a tough outer layer provides further protection and cleanliness
  • Individually labelled and boxed for security and ease of product identification
Additional information

PRODUCT CODES:

BD10 - 0.2 micron
SM10 - 0.45 micron
SC10 - 0.65 micron
CA10 - 1.2 micron

        • Material: Polyethersulfone
        • Micron: 0.65
        • Efficiency (%): 99.99999
        • Length: 10"
        • Diameter: Regular (2.5")
        • End-Cap: ZH - 226 / Fin
        • Seal: EPDM
        • Flow Rate (lpm): 15

Price: £73.00
57.00
Buy 9 from only £57.00

Delivering excellent selectivity of heavy metals including zinc, mercury and copper from potable water supplies, the SHRM also provides water softening properties without the sodium dosing usually found with exclusive softening cartridges. The SRHM can be combined with other filtration and treatment products for a comprehensive solution.

 

Additional information
  • Technology: Heavy Metal Removal Ion Exchange Resin
  • Material: Media : Weak Acid Cation Resin
  • Performance: Heavy Metals
  • Length: 10"
  • Diameter: Regular (2.5")
  • End-Cap: DOE - Double Open Ended
  • Seal: EPDM
  • Flow Rate (lpm): 0.4

Price: £63.10
52.00
Buy 9 from only £52.00

Ion-X from SPECTRUM is an effective range of contaminant removal cartridges.

The SRDI excels in the production of high purity water with average conductivity levels of 0.1µS/cm. The SRDI can be used in conjunction with a sediment pre-filter to deliver small batches of DI water straight from the tap. Where demand increases, the SRDI can be situated post-RO for the polishing of permeate water

  •  
Additional information
  • Technology: Ion Exchange Cartridge
  • Material: Media : Mixed Bed Deionisation Resin
  • Performance: Deionisation
  • Length: 10"
  • Diameter: Regular (2.5")
  • End-Cap: DOE - Double Open Ended
  • Seal: EPDM
  • Flow Rate (lpm): 0.4

0.00 0.00 0.00 0.00 0.00
Price: £25.00
19.00
Buy 15 from only £19.00

The SPECTRUM range of ­filter sleeves and housings provide a truly economical method of surface ­filtration.

The most reusable cartridges in the SPECTRUM portfolio, nylon mesh filter sleeves offer an economic solution for reducing coarse particulate between 60 & 350 micron. With a comparatively small surface area, the nylon sleeves are manufactured from washable media for reuse time and again. The alternative single-use polyethylene sleeve suits applications that require a finer level of filtration. Designed to work with 10" regular diameter housings, both sleeves are used with a support core. Nylon Filter references: 60 micron (white), 100 micron (blue), 150 micron (brown), 200 micron (green) and 350 micron (grey)

Available in standard 10″ as well as miniature sizes, the nylon mesh sleeves inare colour-coded for easy identification and are ideal for coarser applications having the added benefit of being washable for re-use time and again.

The porous polyethylene (PP) sleeve is an ideal alternative for finer filtration, available in 5µm and 25µm in size 1 and 25µm in size 10 (Code SFS-Y-10-µm). The PP benefits from intricate matrices of open-celled, multi-directional pores to create millions of tortuous paths within its structure. Trapping larger particles on the surface and also smaller particles throughout creates a highly effective filter sleeve with the characteristics of a depth filter.

Additional information

Material: Nylon
Micron: Various
Efficiency (%): 75
Length: 10"
Diameter: Regular (2.5")
Flow Rate (lpm): 25


0.00 0.00 0.00 0.00 0.00
0.00 0.00 0.00 0.00 0.00 0.00
Price: £225.00
175.00
Buy 9 from only £175.00
Manufactured using German engineered and produced high quality polyethersulfone media, the SPECTRUM PPPES provides assured and certified absolute bacteria retention characteristics. Lot coded and 100% individually tested, the high surface area media contains no adhesives or binders, with low extractable content offering consistent final product quality. Meeting industry standard requirements, the cartridges are WRAS approved, FDA Title 21 Compliant and meet USP Class VI-121 DegC Plastics.
 

10" Length
Available in 0.05, 0.1,  0.2 ,0.45, and 0.65 microns (choose)
 

Additional information

Code Numbers: PPPES-(micron)-(length) (end cap) (seal)

e.g. PPPES-0.2-10-FHS


Price: £122.00
98.00
Buy 9 from only £98.00

Meeting the requirements of NSF/ANSI Standard 53 and constructed with WRAS approved materials, the Crypto series provides absolute efficiency for the effective removal of Cryptosporidium, Giardia cysts as well as other microorganisms. Manufactured using only high purity Borosilicate glass fibre for optimum cartridge performance, the certified CP and CP+ cartridges deliver Cryptosporidium control where water quality is paramount.

Food Make-up

Critical for the removal of the resilient Cryptosporidium parasite from food manufacturing applications.

Incoming Water

Widespread in the environment, Cryptosporidium is known to be present in many surface and underground water sources.

Soft Drinks

Often used in filtration of many soft drinks applications for Cryptosporidium and the control of bacteria.

Hygiene and Traceability

  • Manufactured in a clean room environment, protecting against unwanted contaminants.
  • Lot coded for material traceability.
  • Specific Quality Assurance Certificate supplied with every cartridge.
  • Each cartridge is vacuum sealed and then enclosed in a durable outer plastic layer for further protection.
Additional information

PRODUCT CODES:

CP10

CP20

CP30

CP40

    • Material: Glassfibre
    • Micron: 1
    • Efficiency (%): 99.999
    • Length: 10"
    • Diameter: Regular (2.5")
    • End-Cap: CG - 213 / Closed
    • Seal: Silicone
    • Flow Rate (lpm): 15

Price: £122.00
98.00
Buy 9 from only £98.00

Meeting the requirements of NSF/ANSI Standard 53 and constructed with WRAS approved materials, the Crypto series provides absolute efficiency for the effective removal of Cryptosporidium, Giardia cysts as well as other microorganisms. Manufactured using only high purity Borosilicate glass fibre for optimum cartridge performance, the certified CP and CP+ cartridges deliver Cryptosporidium control where water quality is paramount.

Food Make-up

Critical for the removal of the resilient Cryptosporidium parasite from food manufacturing applications.

Incoming Water

Widespread in the environment, Cryptosporidium is known to be present in many surface and underground water sources.

Soft Drinks

Often used in filtration of many soft drinks applications for Cryptosporidium and the control of bacteria.

Hygiene and Traceability

  • Manufactured in a clean room environment, protecting against unwanted contaminants.
  • Lot coded for material traceability.
  • Specific Quality Assurance Certificate supplied with every cartridge.
  • Each cartridge is vacuum sealed and then enclosed in a durable outer plastic layer for further protection.
Additional information

PRODUCT CODES:

CP10

CP20

CP30

CP40

  • Material: Glassfibre
  • Micron: 1
  • Efficiency (%): 99.999
  • Length: 10"
  • Diameter: Regular (2.5")
  • End-Cap: FG - 226 / Closed
  • Seal: Silicone
  • Flow Rate (lpm): 15

0.00 0.00 0.00 0.00 0.00 0.00 0.00
Price: £16.50
12.50
Buy 24 from only £12.50

For applications with a higher operating temperature or where polypropylene is incompatible with the feed solution, the SWC cartridge provides graded particulate reduction and is supplied as standard with a stainless steel core for added strength. Due to the natural absorption properties of the cotton media, the SWC exhibits the ability to remove and retain dispersed oil making it suitable for use in degreasing applications.

Additional information
  • Material: Bleached Cotton
  • Micron: 5
  • Efficiency (%): 65
  • Length: 10"
  • Diameter: Regular (2.5")
  • End-Cap: DOE - Double Open Ended
  • Flow Rate (lpm): 15

0.00 0.00 0.00 0.00 0.00 0.00 0.00
Price: £36.00
28.00
Buy 24 from only £28.00

The primary choice across the whole range of cartridges for effective filtration in very high temperature applications, the glass fibre media with a stainless steel core suits applications up to 400 DegC. Media migration is significantly reduced by the internal voile layer which controls fibre release downstream from the cartridge. The SWF has excellent compatibility when filtering strong oxidising agents, as well as acids and is often used to filter oils when heated to reduce viscosity.

Additional information
  • Material: Glassfibre
  • Micron: 10
  • Efficiency (%): 75
  • Length: 10"
  • Diameter: Regular (2.5")
  • End-Cap: DOE - Double Open Ended
  • Flow Rate (lpm): 30