924.00 804.00 84.00 0.00 1044.00
Price: £346.50 346.50

The fibreglass wrapped, A-Series family of high rejection proprietary thin-film RO membranes from GE are characterised by high flux and excellent sodium chloride rejection.


Producing high quality product water from virtually any water source including surface water, tap water, well water or sea water; resistant to chemical and pH swings the GE range of pure water membranes, ensures maximum productivity and the highest mineral separation in the industry. This series meets the requirements of the majority of pure water applications and retrofits all other similar membranes.

Additional information
  • High rejection, low pressure membranes for pure water applications
  • 50°C
  • Average rejection rates AG: up to 99.8% @ 15.5 bar AK: up to 99.5% @ 7.9 bar%

Operating and Design Parameters

pH range:

continuous operation 4 - 11
short term cleansing 2 - 11.5
optimum rejection 7-7.5

Feed NTU 1

Maximum feed SDI < 5

Chlorine tolerance 1,000 ppm over the life of the membrane,dechlorination.

Permeate Flow recommended maximum should not exceed specification.


Price: £23.62
18.21
Buy 12 from only £21.00
Buy 25 from only £18.21

The ERO membrane element from SPECTRUM boasts both excellent average rejection rates (98%) plus the ability to operate at very low (3.6 bar) pressures, resulting in some of the best performing membranes available.

ERO-1812 (98% @ 3.6 bar)

For absolute economy, the new spectrum ERO membrane will deliver the same high water quality at a 20% reduction in flow vs. the standard SPECTRUM 1812 SRO membrane. Similar to all other membranes increasing the incoming flow rate will increase permeate and concentrate flow production.

Additional information

ERO Membranes

  • 100% integrity tested - before leaving the factory all SPECTRUM membrane elements undergo a decay test to show if there are any defects in the membrane.
  • Prolonged shelf life - SPECTRUM SRO membrane elements are shipped dry to prolong shelf life and aid handling.
  • State-of-the-art manufacture - the highly developed membrane technology and manufacturing processes employed in the SRO’s construction ensures it consistently delivers high quality results over the course of its life.

Price: £25.82
18.82
Buy 12 from only £21.44
Buy 25 from only £18.82

The ERO membrane element from SPECTRUM boasts both excellent average rejection rates (98%) plus the ability to operate at very low (3.6 bar) pressures, resulting in some of the best performing membranes available.

ERO-1812 (98% @ 3.6 bar)

For absolute economy, the new spectrum ERO membrane will deliver the same high water quality at a 20% reduction in flow vs. the standard SPECTRUM 1812 SRO membrane. Similar to all other membranes increasing the incoming flow rate will increase permeate and concentrate flow production.

Additional information

ERO Membranes

  • 100% integrity tested - before leaving the factory all SPECTRUM membrane elements undergo a decay test to show if there are any defects in the membrane.
  • Prolonged shelf life - SPECTRUM SRO membrane elements are shipped dry to prolong shelf life and aid handling.
  • State-of-the-art manufacture - the highly developed membrane technology and manufacturing processes employed in the SRO’s construction ensures it consistently delivers high quality results over the course of its life.

0.00 144.00 0.00 96.00 48.00 144.00 48.00 144.00
Price: £1,050.00 1,050.00

hydranautics 8inch membrane tech sheet

hydranautics 8inch membrane tech sheet part 2

Additional information

SPECIFICATION

Max. Applied Pressure = 41.4 Bar

Max. Chlorine Concentration = <0.1ppm

Max. Operating Temperature = 45°C

Max. Feedwater Turbidity = 1.0 NTU

Max. Feedwater SDI = 5.0

Max. Feed Flow = 284 LPM

Max. Pressure Drop for Each Element = 1.0bar

PRODUCT CODES

ESPA2-LD

ESPA2-LD-MAX

ESPA1

LFC3-LD

CPA7-LD

CPA7-MAX

ESPA4-LD

ESPA4-MAX


Price: £456.75 456.75

Established as the industry standard size for small commercial applications, the 4040 range from Hydranautics offers a variety of technologies such as high rejection, low operating pressure and low fouling properties. Each of these characteristics is engineered to suit the requirements of different markets.

      • Technology: Seawater Reverse Osmosis Membrane
      • Material: Thin Film Composite Polyamide
      • Avg Rejection (%): 99.7
      • Performance: High Rejection
      • Length: 40"
      • Diameter: 4"
      • Operating Pressure (bar): 55
      • Permeate Flow Rate (lpm): 4.6
Additional information
 

OTHER PRODUCT CODES

ESPA2-LD-4040

ESPA4-LD-4040

CPA2-4040

LFC3-LD-4040

CPA7-LD-4040

 

 


Price: £1,195.95 1,195.95

Used to treat water from virtually any water source, 8" membranes are used in purification and desalination systems as a reliable solution to high production and stringent water quality requirements. Benefiting from decades of research and development, Hydranautics membranes continue to lead the market.

    • Technology: Tap Water Reverse Osmosis Membrane
    • Material: Thin Film Composite Polyamide
    • Avg Rejection (%): 99.8
    • Performance: High Rejection
    • Length: 40"
    • Diameter: 8"
    • Operating Pressure (bar): 55
    • Permeate Flow Rate (lpm): 23.6
Additional information
 

OTHER PRODUCT CODES

ESPA2-LD-4040

ESPA4-LD-4040

CPA2-4040

LFC3-LD-4040

CPA7-LD-4040

 

 


Price: £1,280.38 1,280.38

Used to treat water from virtually any water source, 8" membranes are used in purification and desalination systems as a reliable solution to high production and stringent water quality requirements. Benefiting from decades of research and development, Hydranautics membranes continue to lead the market.

  • Technology: Tap Water Reverse Osmosis Membrane
  • Material: Thin Film Composite Polyamide
  • Avg Rejection (%): 99.8
  • Performance: High Rejection
  • Length: 40"
  • Diameter: 8"
  • Operating Pressure (bar): 55
  • Permeate Flow Rate (lpm): 26
Additional information
 

OTHER PRODUCT CODES

ESPA2-LD-4040

ESPA4-LD-4040

CPA2-4040

LFC3-LD-4040

CPA7-LD-4040

 

 


16.75 0.00
Price: £22.36
21.26
Buy 2 from only £21.26
Replacement Filter set for Pallas Enjoy Smart or Cool RO system.

Inline filters are designed in such a way that water passes through the entire cartridge, remaining in contact with the filter material for maximum time, which ensures a high level of pollution absorption.

The filter material is placed in a durable polypropylene housing (cartridge). These cartridges have the  quick 1/4 "Quick Filter couplings on both sides of the end caps to connect to the filter system.

The direction of water movement is indicated on the housing.

Cartridge Specifications:
Sediment Cartridge
Cartridge Size: 2.5 "x 12";
Quick Connections Quick Filter: 1/4 ";
Composition: polypropylene fiber
Productivity: 2.8 L / min;
Resource: up to 9500 liters;
Maximum working pressure: 8 bar
Minimum temperature: + 4 ° C;
Maximum temperature: + 42 ° C;
Service life: 6 months.

Carbon Block Cartridge:
Cartridge Size: 2.5 "x 12";
Quick Connections Quick Filter: 1/4 ";
Ingredients: activated carbon from coconut shell;
Action: purification of water from chlorine, organic substances, some pesticides,
Productivity: 2.8 L / min;
Resource: up to 9500 liters;
Maximum working pressure: 8 bar
Minimum temperature: + 4 ° C;
Maximum temperature: + 42 ° C;
Service life: 6 months

GAC Carbon Cartridge:
Cartridge Size: 2.5 "x 12";
Quick Connections Quick Filter: 1/4 ";
Composition: granular activated carbon
Productivity: 2.8 L / min;
Resource: up to 9500 liters;
Maximum working pressure: 8 bar
Minimum temperature: + 4 ° C;
Maximum temperature: + 42 ° C;
Service life: 6 months.

Post Carbon Cartridge:
Final polishing filter for RO system

1812-80 Membrane (Optional)
The Membrane has a service life of 12 month so requires changing less frequently.

The yield, reduction in throughput and cartridge life depend on the degree of water pollution.

0.00 0.00
Price: £25.00 25.00

Pallas RO membranes.

50 or 75 GPD (Gallons Per Day)


Price: £198.45
145.95
Buy 8 from only £145.95

Genuine Pentair RO Merlin Replacement Membrane

The TLC-350 is the original Pentair membrane for the PRF-RO System. At a pressure rating of 2.8 bar, with water at 10°C the system can produce 1 litre per minute of RO water. For enhanced performance upgrade to a PRF-750-RO membrane.


35.00 0.00
Price: £23.62
20.13
Buy 2 from only £21.88
Buy 3 from only £20.13

Replacement Filter Set 1 for Standard Reverse Osmosis Drinking System

Replacement Filter Set comprising of Sediment, Pre-Carbon and Post carbon Filters.
Set comprises of the following:
1 x 5 Micron Sediment pre-Filter
1 x 5 Micron Pre-Carbon Block
1 x Carbon Post polishing filter with 1/4" push fit connectors

This set is supplied using high quality replacement filters and will fit most standard RO system that use standard 10" Drop in Filters. Some systems may use a GAC carbon filter which is can be replaced with the Carbon Block filter to acheive the same results.

The RO systems Membrane, which is the main component of an RO system and usually needs replacing less frequently than the above filters, can be added as an optional extra if required.The membrane supplied with this kit if required is an 1812-50 membrane commonly used in many of these undersink standard systems.

Additional information
  • Filter Replacement Set for many 4 Stage Reverse Osmosis System
  • Compatible with many brands and models such as ACRO4 4 stage RO drinking system
  • Comprises of 3 filters, Sediment, Pre-Carbon & Post Carbon
  • Top quality
  • Optional Replacement 1812-50 Membrane can be added.

35.00
Price: £31.50
28.00
Buy 2 from only £29.76
Buy 3 from only £28.00

Replacement Filter Set 2 for Standard Reverse Osmosis Drinking System

Replacement Filter Set comprising of Sediment, Pre-Carbon, Pre-GAC Carbon and Post carbon Filters.
Set comprises of the following:
1 x 5 Micron Sediment pre-Filter
1 x 5 Micron Pre-Carbon Block
1 x GAC Filter Cartridge
1 x Carbon Post polishing filter with 1/4" push fit connectors

This set is supplied using high quality replacement filters and will fit most standard RO system that use standard 10" Drop in Filters. Some systems may use a GAC carbon filter which is can be replaced with the Carbon Block filter to acheive the same results.

The RO systems Membrane, which is the main component of an RO system and usually needs replacing less frequently than the above filters, can be added as an optional extra if required.The membrane supplied with this kit if required is an 1812-50 membrane commonly used in many of these undersink standard systems.

Additional information
  • Filter Replacement Set for many 4 Stage Reverse Osmosis System
  • Compatible with many brands and models such as ACRO4 4 stage RO drinking system
  • Comprises of 4 filters, Sediment, Pre-Carbon Block, Pre-Carbon GAC & Post Carbon
  • Top quality
  • Optional Replacement 1812-50 Membrane can be added.

Price: £71.00 71.00
SPECTRUM Stainless Steel Membrane Housing 4” x 21”

Lightweight and durable to withstand the rigours of RO water production in the window washing market these membrane housings are suitable for 4040 and 4021 membranes. Designed with operator in mind they have a simplified end-cap removal system and come complete with O-rings, clamp fittings and mounting straps.
Additional information
    • Material: 304L Stainless Steel
    • Length: 21"
    • Diameter: 4"
    • Port Size: 1/2" x 3/4"
    • Seal: Silicone
    • Max Pressure (bar): 20

Price: £88.00 88.00
SPECTRUM Stainless Steel Membrane Housing 4” x 40”

Lightweight and durable to withstand the rigours of RO water production in the window washing market these membrane housings are suitable for 4040 and 4021 membranes. Designed with operator in mind they have a simplified end-cap removal system and come complete with O-rings, clamp fittings and mounting straps.
Additional information
  • Material: 304L Stainless Steel
  • Length: 40"
  • Diameter: 4"
  • Port Size: 1/2" x 3/4"
  • Seal: Silicone
  • Max Pressure (bar): 20

20.00 15.00 10.00 5.00 0.00
Price: £22.00
15.00
Buy 12 from only £18.00
Buy 25 from only £15.00
Fully automated production ensures consistency whilst maximising the usable surface area of this multi-leaf membrane. The SRO 1.8'' elements repeatedly perform to specification, with flows up to 30% higher than traditionally hand-rolled elements, which are often prone to a high failure rate in-situ. The SRO 1.8'' membrane is a reliable choice for applications from laboratory to residential systems. For use with the EMH-1812 housing and most other 1812 housings.

Click image for identical spec - Cheaper option

 

Additional information
  • Technology: Brackish Water Reverse Osmosis Membrane
  • Material: Thin Film Composite Polyamide
  • Avg Rejection (%): 98.5
  • Performance: Low Energy
  • Length: 12"
  • Diameter: 1.8"
  • Operating Pressure (bar): 4.1
  • Permeate Flow Rate (lpm): 35=0.1, 50=0.16, 75=0.19, 100=0.29, 150=0.47

14.00 8.00 9.00 4.00 0.00
Price: £13.00
9.00
Buy 12 from only £12.00
Buy 25 from only £9.00
Fully automated production ensures consistency whilst maximising the usable surface area of this multi-leaf membrane. The 1.8'' ROM elements repeatedly perform to specification, with flows up to 30% higher than traditionally hand-rolled elements, which are often prone to a high failure rate in-situ. The 1.8'' membranes are a reliable choice for applications from laboratory to residential systems. For use with the ROH-1812 housing and most other 1812 housings.

 

Additional information
  • Technology: Brackish Water Reverse Osmosis Membrane
    Material: Thin Film Composite Polyamide
    Avg Rejection (%): 98.5
    Performance: Low Energy
    Length: 12"
    Diameter: 1.8"
    Operating Pressure (bar): 4.1
    Permeate Flow Rate (lpm): 35=0.1, 50=0.16, 75=0.19, 100=0.29, 150=0.47