NeutraCalc - Scale Inhibitor
(Ref:500212)
1194.80 790.06 564.54 433.12 332.77 202.60 90.13 0.00
Price: £109.78 109.78

NeutrAcalC systems are available in different sizes from a small 10" housing with a 4 Lpm Flow rate to a huge 12" Diameter x 54" High with 113 Lpm flow rate.

The Technology
NeutrAcalC is a water treatment technology using specifically designed beads to combat the effects of hard water and inhibit formation of limescale. Each bead is covered in imperfections called media templates that attract minerals (Limescale, carbonates) and combine them to form micro-crystals that slowly grow. The inactive microscopic crystal particles then break off and float freely through the system. These crystals make their way through the plumbing system without sticking to pipes, fixtures, valves or heating elements.

The NeutrAcalC technology differs from a conventional water softener which uses ion exchange to remove the limescale forming calcium and magnesium from water and replacing them with sodium ions. This ion exchange process requires a water meter, brine regeneration and a drain to flush during regeneration while NeutrAcalC requires none of these.

Unit Sizes Available (please select size required above)

Item Name Max flow Connections Description
NeutrAcalC 10 SL 4 lpm 3/4" F BSP 10" Slimline System, 4 lpm, 3/4" BSP Female Ports
NeutrAcalC 10 BB 10 lpm 1" F BSP 10" Large Diameter System, 10 lpm, 1" BSP Female Ports
NeutrAcalC 817 15 lpm 3/4" M BSP 8" x 17" System, 15 lpm, 3/4" BSP Male Ports
NeutrAcalC 835 38 lpm 1" M BSP 8" x 35" System, 38 lpm, 1" BSP Male Ports
NeutrAcalC 935 45 lpm 1" M BSP 9" x 35" System, 45 lpm, 1" BSP Male Ports
NeutrAcalC 1035 60 lpm 1" M BSP 10" x 35" System, 60 lpm, 1" BSP Male Ports
NeutrAcalC 1054 75 lpm 1" M BSP 10" x 54" System, 75 lpm, 1" BSP Male Ports
NeutrAcalC 1252 113 lpm 1" M BSP 12" x 52" System, 113 lpm, 1" BSP Male Ports

Bypass system included for NC 817 to NC 1252

Advantages

  • Stops limescale forming
  • Green & Eco-friendly: no use of regenerants
  • No Salt required
  • No chloride in the water
  • No rinsing “water saving”
  • No regeneration, so no drain required
  • No electricity, compact solution & easy installation
  • No change in the chemical composition “healthy minerals retained”
  • No effect on corrosion
  • Maintain the efficiency of your boiler and heating system
  • Protects appliances that use hot water
  • Independently tested up to 99.6% efficiency using German DVGW protocol

The NeutrAcalC is not an ion exchange softener therefore will not produce soft water, however it will remove the effects of limescale produced by hard water.

Applications include:

  • Hotels
  • Offices
  • Homes
  • Restaurants
  • Cafeterias
  • Coffee shops
  • Humidifiers
  • Irrigation systems
  • Ground source heat pumps
Additional information

Hardness Max 1300 ppm
pH level of between 6.5 and 8.5
Temperature range 5¢XC - 43¢XC
Water pressure 15 to 100 psi Max
Chlorine < 3ppm
Iron < 0.3 mg/l
Manganese <0.05 mg/l
Copper None
No Oil
No Polyphosphates
No Hydrogen Sulphide
Silica 10 ppm Max
New copper pipes should be passivized for a min of 4 weeks before using NeutrAcalC
Not suitable for closed loop systems without blow down