PRISM VALUE RANGE Sediment Filters

20" Polyester Pleated Filter (0.5 - 50 Micron)

(Ref:FC-SPPL-R20-1X-V)

Each

Unit price
£ 20.00

Box of 12

Unit price
£ 14.00
You save 30%

0.00 0.00 0.00 0.00 0.00 0.00 0.00

Price: £20.00 20.00

20" Polyester Pleated Filter (0.5 - 50 Micron) Sediment Filter

Delivering high efficiency filtration, the mono layer media of the Value Ployester Pleat delivers economical filtration with high surface area and high flow potential, whilst maintaining a low pressure drop. Vinyl plastisol end-caps eliminate the need for gaskets and maintain the integrity of the pleat pack, further supported by the tough inner polypropylene core. Resilient polyester media, used in a variety of applications from borehole and river water to harsher chemicals. For improved efficiency and classification capabilities refer to the PRISM Plus and Max Pleat lines

This can be used as an alternative to the Pentek R Series filters.

Additional information

- - Material: Polyester
  - Micron: 0.5
  - Efficiency (%): 90
  - Length: 20"
  - Diameter: Regular (2.5")
  - End-Cap: DOE - Double Open Ended
  - Flow Rate (lpm): 50

20''LD (Large Diameter) Polyester Pleated Filter (0.5 - 50 Micron)

(Ref:L20-FC-SPPL)

Each

Unit price
£ 53.00

Box of 4

Unit price
£ 39.00
You save 26%

0.00 0.00 0.00 0.00 0.00 0.00

Price: £53.00 53.00

20" LD Large Diameter (also known as BB) High Flow Polyester Sediment

Delivering high efficiency filtration, the mono layer media of the Value Ployester Pleat delivers economical filtration with high surface area and high flow potential, whilst maintaining a low pressure drop. Vinyl plastisol end-caps eliminate the need for gaskets and maintain the integrity of the pleat pack, further supported by the tough inner polypropylene core. Resilient polyester media, used in a variety of applications from borehole and river water to harsher chemicals. For improved efficiency and classification capabilities refer to the PRISM Plus and Max Pleat lines

This can be used as an alternative to the Pentek R Series filters.

Additional information

Material: Polyester
Micron: 1 - 50
Efficiency (%): 90
Length: 20"
Diameter: Large Diameter (4.5")
End-Cap: DOE - Double Open Ended
Flow Rate (lpm): 90

30" Polyester Pleated Filter (0.5 - 50 Micron)

(Ref:R30-FC-SPPL)

0.00 0.00 0.00 0.00 0.00 0.00 0.00

Price: £25.00

18.00

Buy 9 from only £20.00

Buy 27 from only £18.00

30" Polyester Pleated Filter (0.5 - 50 Micron) Sediment Filter

Delivering high efficiency filtration, the mono layer media of the Value Ployester Pleat delivers economical filtration with high surface area and high flow potential, whilst maintaining a low pressure drop. Vinyl plastisol end-caps eliminate the need for gaskets and maintain the integrity of the pleat pack, further supported by the tough inner polypropylene core. Resilient polyester media, used in a variety of applications from borehole and river water to harsher chemicals. For improved efficiency and classification capabilities refer to the PRISM Plus and Max Pleat lines

Additional information

- - Material: Polyester
    
    Micron: 0.5 - 50
    
    Efficiency (%): 90
    
    Length: 30"
    
    Diameter: Regular (2.5")
    
    End-Cap: DOE - Double Open Ended
    
    Flow Rate (lpm): 75

40" Polyester Pleated Filter (0.5 - 50 Micron)

(Ref:R40-FC-SPPL)

0.00 0.00 0.00 0.00 0.00 0.00 0.00

Price: £34.00

24.00

Buy 9 from only £26.00

Buy 27 from only £24.00

40" Polyester Pleated Filter (0.5 - 50 Micron) Sediment Filter

Delivering high efficiency filtration, the mono layer media of the Value Ployester Pleat delivers economical filtration with high surface area and high flow potential, whilst maintaining a low pressure drop. Vinyl plastisol end-caps eliminate the need for gaskets and maintain the integrity of the pleat pack, further supported by the tough inner polypropylene core. Resilient polyester media, used in a variety of applications from borehole and river water to harsher chemicals. For improved efficiency and classification capabilities refer to the PRISM Plus and Max Pleat lines

Additional information

- - Material: Polyester
    
    Micron: 0.5 - 50
    
    Efficiency (%): 90
    
    Length: 40"
    
    Diameter: Regular (2.5")
    
    End-Cap: DOE - Double Open Ended
    
    Flow Rate (lpm): 100

9 3/4" Polyester Pleated Filter (0.5 - 50 Micron)

(Ref:R10-FC-SPPL)

Each

Unit price
£ 12.00

Box of 12

Unit price
£ 7.50
You save 38%

0.00 0.00 0.00 0.00 0.00 0.00 0.00

Price: £12.00 12.00

10" Standard Diameter High Flow Polyester Sediment

Delivering high efficiency filtration, the mono layer media of the Value Ployester Pleat delivers economical filtration with high surface area and high flow potential, whilst maintaining a low pressure drop. Vinyl plastisol end-caps eliminate the need for gaskets and maintain the integrity of the pleat pack, further supported by the tough inner polypropylene core. Resilient polyester media, used in a variety of applications from borehole and river water to harsher chemicals. For improved efficiency and classification capabilities refer to the PRISM Plus and Max Pleat lines

This can be used as an alternative to the Pentek R Series filters.

Additional information

- Material: Polyester
- Micron: 0.5 - 50
- Efficiency (%): 90
- Length: 9 3/4"
- Diameter: Regular (2.5")
- End-Cap: DOE - Double Open Ended
- Flow Rate (lpm): 25

9 3/4''LD (Large Diameter) Polyester Pleated Filter (0.5 - 50 Micron)

(Ref:L10-FC-SPPL)

Each

Unit price
£ 26.00

Box of 4

Unit price
£ 19.50
You save 25%

0.00 0.00 0.00 0.00 0.00 0.00 0.00

Price: £26.00 26.00

10" LD Large Diameter (also known as BB) High Flow Polyester Sediment

Delivering high efficiency filtration, the mono layer media of the Value Ployester Pleat delivers economical filtration with high surface area and high flow potential, whilst maintaining a low pressure drop. Vinyl plastisol end-caps eliminate the need for gaskets and maintain the integrity of the pleat pack, further supported by the tough inner polypropylene core. Resilient polyester media, used in a variety of applications from borehole and river water to harsher chemicals. For improved efficiency and classification capabilities refer to the PRISM Plus and Max Pleat lines

This can be used as an alternative to the Pentek R Series filters.

Additional information

- - Material: Polyester
  - Micron: 0.5 - 50
  - Efficiency (%): 90
  - Length: 9 3/4"
  - Diameter: Large Diameter (4.5")
  - End-Cap: DOE - Double Open Ended
  - Flow Rate (lpm): 50

9 7/8" Spun Polypropylene Filter Value Standard Diameter (1 to 150 micron) - PRISM VALUE RANGE

(Ref:FC-DSPP-R10-1X-V)

Each

Unit price
£ 2.75

Box of 16

Unit price
£ 1.60
You save 42%

0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

Price: £2.75 2.75

The lowest cost spun-bonded cartridge in the PRISM range, the Value grade spun cartridge is ideally suited for batch processes where repeated change-out is required. With a graded density construction, this entry level cartridge is excellent at preventing premature blinding of other filtration systems further downstream.

Select from 1 micron rating to 150 micron.

Additional information

    Material: Polypropylene
    Micron: 1, 5, 10 & 20
    Efficiency (%): 70
    Length: 9 7/8"
    Diameter: Regular (2.5")
    End-Cap: DOE - Double Open Ended
    Flow Rate (lpm): 15

Alternative Part Numbers:

SSP-1-97/8
SSP-5-97/8
SSP-10-97/8
SSP-20-97/8

Spun Polypropylene Filter 20" Standard Diameter - PRISM VALUE RANGE

(Ref:FC-DSPP-R20-1X-V)

Each

Unit price
£ 4.80

Box of 12

Unit price
£ 3.00
You save 38%

0.00 0.00 0.00 0.00 0.00 0.00

Price: £4.80 4.80

The lowest cost spun-bonded cartridge in the PRISM range, the Value grade spun cartridge is ideally suited for batch processes where repeated change-out is required. With a graded density construction, this entry level cartridge is excellent at preventing premature blinding of other filtration systems further downstream.

Additional information

- Material: Polypropylene
- Micron: 1, 5, 10, 20, 50, 75, 100
- Efficiency (%): 70
- Length: 20"
- Diameter: Regular (2.5")
- End-Cap: DOE - Double Open Ended
- Flow Rate (lpm): 30

Spun Polypropylene Filter 30" Standard Diameter - PRISM VALUE RANGE

(Ref:FC-DSPP-R30-1X-V)

Each

Unit price
£ 6.50

Box of 16

Unit price
£ 4.20
You save 35%

0.00 0.00 0.00 0.00 0.00 0.00 0.00

Price: £6.50 6.50

The lowest cost spun-bonded cartridge in the PRISM range, the Value grade spun cartridge is ideally suited for batch processes where repeated change-out is required. With a graded density construction, this entry level cartridge is excellent at preventing premature blinding of other filtration systems further downstream.

Additional information

- Material: Polypropylene
- Micron: 1, 5, 10, 20, 50, 75, 100
- Efficiency (%): 70
- Length: 30"
- Diameter: Regular (2.5")
- End-Cap: DOE - Double Open Ended
- Flow Rate (lpm): 45

Spun Polypropylene Filter 4 7/8" Standard Diameter 5 micron - PRISM VALUE RANGE

(Ref:109010)

Each

Unit price
£ 3.00

Box of 48

Unit price
£ 1.30
You save 57%

Price: £3.00 3.00

The lowest cost spun-bonded cartridge in the PRISM range, the Value grade spun cartridge is ideally suited for batch processes where repeated change-out is required. With a graded density construction, this entry level cartridge is excellent at preventing premature blinding of other filtration systems further downstream.

Additional information

Material: Polypropylene
Micron: 5
Efficiency (%): 70
Length: 4 7/8"
Diameter: Regular (2.5")
End-Cap: DOE - Double Open Ended
Flow Rate (lpm): 7.5

Spun Polypropylene Filter 40" Standard Diameter - PRISM VALUE RANGE

(Ref:FC-DSPP-R40-1X-V)

0.00 0.00 0.00 0.00 0.00 0.00 0.00

Price: £8.50

5.00

Buy 16 from only £6.00

Buy 48 from only £5.00

The lowest cost spun-bonded cartridge in the PRISM range, the Value grade spun cartridge is ideally suited for batch processes where repeated change-out is required. With a graded density construction, this entry level cartridge is excellent at preventing premature blinding of other filtration systems further downstream.

Additional information

Material: Polypropylene
Micron: 1, 5, 10, 20, 50, 75, 100
Efficiency (%): 70
Length: 20"
Diameter: Regular (2.5")
End-Cap: DOE - Double Open Ended
Flow Rate (lpm): 30

Wound Polypropylene Filter 10" x 2.5" (0.5 to 150 micron)

(Ref:FC-DWPP-R10-V)

Each

Unit price
£ 4.00

Box of 16

Unit price
£ 2.50
You save 38%

0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

Price: £4.00 4.00

The most popular wound cartridge media by far, the PRISM wound polypropylene offers broad chemical compatibility and good temperature resistance at low cost. With over 50 years proven experience and in a variety of micron sizes, across regular and large diameters, the DWPP provides a basic filtration solution perfectly suited for first-stage and general particulate reduction. Whilst newer spun technologies offer higher efficiency and longer life cartridges, wounds still exceed filtration standards in many applications.

Additional information

- Material: Polypropylene
- Micron: 1, 5, 10, 25, 50, 75, 100, 150
- Efficiency (%): 65
- Length: 10"
- Diameter: Regular (2.5")
- End-Cap: DOE - Double Open Ended
- Flow Rate (lpm): 15
Alternative Product Codes:

SWP-1-10        (10" x 2.5" - 1 micron)
SWP-5-10        (10" x 2.5" - 5 micron)
SWP-10-10      (10" x 2.5" - 10 micron)
SWP-25-10      (10" x 2.5" - 25 micron)
SWP-50-10      (10" x 2.5" - 50 micron)
SWP-75-10      (10" x 2.5" - 75 micron)
SWP-100-10    (10" x 2.5" - 100 micron)
SWP-150-10    (10" x 2.5" - 150 micron)

Wound Polypropylene Filter 10" x 4.5" Large Diameter (1 to 100 micron)

(Ref:FC-DWPP-L-10)

Each

Unit price
£ 19.50

Box of 4

Unit price
£ 13.00
You save 33%

0.00 0.00 0.00 0.00 0.00 0.00 0.00

Price: £19.50 19.50

The most popular wound cartridge media by far, the PRISM wound polypropylene offers broad chemical compatibility and good temperature resistance at low cost. With over 50 years proven experience and in a variety of micron sizes, across regular and large diameters, the DWPP provides a basic filtration solution perfectly suited for first-stage and general particulate reduction. Whilst newer spun technologies offer higher efficiency and longer life cartridges, wounds still exceed filtration standards in many applications.

Additional information

- Material: Polypropylene
- Micron: 1, 5, 10, 25, 50, 75, 100
- Efficiency (%): 65
- Length: 10"
- Diameter: Large Diameter (4.5")
- End-Cap: DOE - Double Open Ended
- Flow Rate (lpm): 15
You may have previously used these product codes:

e.g. SWP-1-10LD (10" x 4.5" - 1 micron)
SWP-5-10LD (10" x 4.5" - 5 micron)
etc.

Wound Polypropylene Filter 20" x 2.5" Standard Diameter (0.5 to 100 micron)

(Ref:FC-DWPP-R-20)

Each

Unit price
£ 8.00

Box of 16

Unit price
£ 4.20
You save 48%

0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

Price: £8.00 8.00

The most popular wound cartridge media by far, the PRISM wound polypropylene offers broad chemical compatibility and good temperature resistance at low cost. With over 50 years proven experience and in a variety of micron sizes, across regular and large diameters, the DWPP provides a basic filtration solution perfectly suited for first-stage and general particulate reduction. Whilst newer spun technologies offer higher efficiency and longer life cartridges, wounds still exceed filtration standards in many applications.

Additional information

- Material: Polypropylene
- Micron: 0.5, 1, 5, 10, 25, 50, 75, 100
- Efficiency (%): 65
- Length: 20"
- Diameter: Regular (2.5")
- End-Cap: DOE - Double Open Ended
- Flow Rate (lpm): 30
ALTERNATIVE Product Codes:

e.g SWP-5-10 (10" x 2.5" - 5 micron)
SWP-5-20 (20" x 2.5" - 5 micron)

Wound Polypropylene Filter 20" x 4.5" Large Diameter (1-100 micron)

(Ref:FC-DWPP-L-20)

Each

Unit price
£ 34.00

Box of 4

Unit price
£ 25.00
You save 26%

0.00 0.00 0.00 0.00 0.00 0.00 0.00

Price: £34.00 34.00

The most popular wound cartridge media by far, the PRISM wound polypropylene offers broad chemical compatibility and good temperature resistance at low cost. With over 50 years proven experience and in a variety of micron sizes, across regular and large diameters, the DWPP provides a basic filtration solution perfectly suited for first-stage and general particulate reduction. Whilst newer spun technologies offer higher efficiency and longer life cartridges, wounds still exceed filtration standards in many applications.

Additional information

- Material: Polypropylene
- Micron: 1, 5, 10, 25, 50, 75, 100
- Efficiency (%): 65
- Length: 20"
- Diameter: Large Diameter (4.5")
- End-Cap: DOE - Double Open Ended
- Flow Rate (lpm): 30
Old Product Codes:

e.g. SWP-1-10LD (10" x 4.5" - 1 micron)
SWP-5-10LD (10" x 4.5" - 5 micron)
etc.

Wound Polypropylene Filter 9 3/4" x 2.5" (1 to 100 micron)

(Ref:FC-DWPP-R93/4-V)

Each

Unit price
£ 4.00

Box of 16

Unit price
£ 2.00
You save 50%

0.00 0.00 0.00 0.00 0.00

Price: £4.00 4.00

The most popular wound cartridge media by far, the PRISM wound polypropylene offers broad chemical compatibility and good temperature resistance at low cost. With over 50 years proven experience and in a variety of micron sizes, across regular and large diameters, the DWPP provides a basic filtration solution perfectly suited for first-stage and general particulate reduction. Whilst newer spun technologies offer higher efficiency and longer life cartridges, wounds still exceed filtration standards in many applications.

Additional information

- Material: Polypropylene
- Micron: 0.5, 1, 5, 10, 25, 50, 75, 100, 150
- Efficiency (%): 65
- Length: 9 3/4"
- Diameter: Regular (2.5")
- End-Cap: DOE - Double Open Ended
- Flow Rate (lpm): 15
Old Product Codes:

e.g SWP-5-10 (10" x 2.5" - 5 micron)
SWP-5-20 (20" x 2.5" - 5 micron)

Filter by category

Filter by type

Connect with us