Pentair Pentek ChlorPlus carbon block cartridges help reduce sediment while providing greater chloramine performance capacities than granular carbon. They also significantly reduce the carbon fines found in many granular canisters.

Pentek RFFE20-BB Iron Reducing Filter

The MAZ 10 inch and 20 inch filter cartridges are designed to provide an easy and effective method for reducing dissolved iron from water that results in an improvement of water taste. These cartridges are helping to eliminate the orange and brown stains that are often found in sinks, toilets, tubs and other plumbing fixtures. It also reduces the possible damage to pipes and water heaters.

Completely suited to drinking water applications, the MAZ cartridges should be installed on the main cold water line after the pressure tank or water meter. For best results, pre-sediment and post carbon treatment is recommended. As water flows through the cartridge the MAZ causes the iron to oxidize and drop out of the flow, holding it within its matrix to ensure no harmful chemicals are added to the water.

20" x 4.5"

 

Similar to the GAC-10  filter, the TS-GAC-10 will not only remove Chlorine taste & odour but will also help with Scale reduction. The addition of FDA grade phosphate crystals reduces scale deposits and rust stains to protect fittings and appliances.

Will fit Pentek style housings and 3 and 4 stage RO systems.

Pentek CFB-Plus 10" Modified Carbon Filter

The Pentair CFB-Plus range of modified wet moulded carbon blocks feature enhanced chlorine, taste and odour reduction with premier dirt holding capabilities. 

Powdered activated carbon is bonded to the fibres, creating an excellent sediment reduction cartridge, which combines the benefits of both a depth filter and carbon block into a single cartridge.

Certified and tested by NSF International to NSF/ANSI Standard 42 and manufactured entirely from FDA compliant materials, the CFB-Plus series is ideal for a wide  range of applications, including food service, commercial and industrial applications, as well as a variety of residential uses.

Available in 10" (9 3/4") and 20"" sizes. 

Pentek CBC-10 Carbon Block 10 inch 0.5 Micron Sediment Filter

Pentair Pentek CBC Series Cartridges are highly effective at reducing unwanted bad taste & odor and chlorine taste & odor and other contaminants from potable drinking water. CBC Series Cartridges are an ideal choice for a wide range of residential, food service, commercial and industrial applications. They also make excellent polishing filters or pre-filters in applications requiring fine filtration and high capacity.

Features and Benefits

• Reduces particles as small as 0.5 micron in size by mechanical means
• Premium high capacity bad taste & odor and chlorine taste & odor reduction
• Enhanced dirt-holding capacity

Pentek CBR2-10 Carbon Block 10 inch 0.5 Micron Filter

Pentair Pentek CBR2-10 Cartridge is an advanced multi-media cartridges designed to reduce chlorine taste & odor and other contaminants. CBR2 Series Cartridges are manufactured using a powdered activated carbon (PAC) with a specially designed adsorbent media.

These cartridges are protected by a uniquely formulated polyolefin bilaminate prefilter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.  As with our standard Pentek CBC Series Carbon Block, the CBR2-10 is effective at reducing levels of chlorine taste & odor and other contaminants.

Features and Benefits

• Reduces particles as small as 0.5 micron in size by mechanical means
• Premium high-capacity chlorine taste & odor reduction exceeding 20,000 gallons

Pentek EPM-20 Carbon Block

Pentair Pentek EPM Series Cartridges are a modified version of the EP Series Cartridge. An economical price makes this cartridge suitable for taste, odor and chlorine taste & odor reduction, as well as sediment filtration.

Pentek EPM-10BB Large Diameter Carbon Block

Pentair Pentek EPM Series Cartridges are a modified version of the EP Series Cartridge. An economical price makes this cartridge suitable for taste, odor and chlorine taste & odor reduction, as well as sediment filtration.

Pentek EPM-10 Carbon Block

The EPM range is aimed at applications where frequent changeout is required, typically batch processes and where a lower capacity cartridge suits regular routine changeouts. Extruded from bituminous, acid-washed activated powder with a medium mesh structure, the high porosity design and 10 micron filtration prevent plugging prematurely and eliminate the need for pre-filtration. EPM cartridges are NSF 42 certified and are manufactured entirely from FDA compliant materials making them an ideal choice for a wide range of applications including food service.

 

BOX QUANTITY ONLY (x12)

Pentek EP Series Carbon Block Cartridges are manufactured using a process that yields a cartridge with a nominal 5-micron filtration rating and high dirt-holding capacity. A high porosity design helps prevent the cartridge from plugging before its adsorption capacity is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop.

These cartridges are protected by a uniquely formulated polyolefin bilaminate pre-filter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges. EP Series Cartridges make an ideal choice for a wide range of residential, food service, commercial and industrial applications.

Features & Benefits
•High dirt-holding capacity maximizes utilization of the carbon block
•Highly effective bad taste & odor and chlorine taste & odor reduction
•Nominal 5-micron rating

Pentek EP-10BB Wide Diameter Carbon Block

An extension to the EPM range is the NSF 42 certified EP, offering 100% greater removal capacity for only a 10% average increase in cost.

EP Series carbon briquette cartridges are manufactured using a patented process that yields a cartridge with a nominal 5-micron filtration rating, high dirt-holding tolerance. A high porosity design helps prevent the cartridge from plugging before its adsorption capacity is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop.

These cartridges are protected by Endurawrap®, a uniquely formulated polyolefin bilaminate pre-filter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.

Available in 10" (9 3/4") and 20" sizes. 
Please call us for volume discounts on these or any other filters

Pentek FloPlus 10" Carbon Filter

The FloPlus from Pentair uses Fibredyne technology to significantly enhance cyst, chlorine and sediment reduction.

The FloPlus™ is an NSF 53 certified cyst reduction cartridge, that functions like a nominal 10 micron cartridge. Handling extremely high flow rates (in excess of 95 lpm) with no detriment to the water quality, and delivering outstanding chlorine, taste and odour, and 99.95% cyst reduction, the FloPlus in their standard or large diameter configurations combine the advantages of a depth filter with one of the greatest life capacity, cyst-capable carbons.

A specialised cartridge for electroplating applications, the C-155 represents the best possible technology available for the marketplace. The bonded PAC used in the Fibredyne C-155 excels in removing organics and particulate and ensures sulphur is not leached into the plating bath, along with a post filtration layer preventing carbon fines after initial flushing. The C-155 prevents pitted deposits, haze, clouds and discolouration to provide a bright electroplating finish. Building on the same technology as the discontinued ELPC cartridge, the C-155 has a reduced diameter allowing simple retrofitting to a much wider range of standard housings within the finishing industry.

The latest in carbon technology, Pentair Fibredyne stands for best of both worlds: a range of cartridges that combine activated carbon technology with depth filtration. This allows all the benefits of activated carbon with minimum pressure drop, thanks to using powdered activated carbon embedded in a polyethylene matrix. With premium chlorine, taste and odour reduction, the CFB-Plus is a versatile cartridge, with the highest sediment reduction promoting a long life and the ideal, trusted choice for residential, commercial or industrial applications.

The latest in carbon technology, Pentair Fibredyne stands for best of both worlds: a range of cartridges that combine activated carbon technology with depth filtration. This allows all the benefits of activated carbon with minimum pressure drop, thanks to using powdered activated carbon embedded in a polyethylene matrix. With premium chlorine, taste and odour reduction, the CFB-Plus is a versatile cartridge, with the highest sediment reduction promoting a long life and the ideal, trusted choice for residential, commercial or industrial applications.

The latest in carbon technology, Pentair Fibredyne stands for best of both worlds: a range of cartridges that combine activated carbon technology with depth filtration. This allows all the benefits of activated carbon with minimum pressure drop, thanks to using powdered activated carbon embedded in a polyethylene matrix. With premium chlorine, taste and odour reduction, the CFB-Plus is a versatile cartridge, with the highest sediment reduction promoting a long life and the ideal, trusted choice for residential, commercial or industrial applications.

The latest in carbon technology, Pentair Fibredyne stands for best of both worlds: a range of cartridges that combine activated carbon technology with depth filtration. This allows all the benefits of activated carbon with minimum pressure drop, thanks to using powdered activated carbon embedded in a polyethylene matrix. With premium chlorine, taste and odour reduction, the CFB-Plus is a versatile cartridge, with the highest sediment reduction promoting a long life and the ideal, trusted choice for residential, commercial or industrial applications.

Pentek CFBC 10" Modified Carbon Filter

The CFBC uses Fibredyne technology to achieve the best in cyst and chlorine reduction with the additional advantage of sediment reduction.

Tested and certified to NSF/ANSI Standard 42, the CFBC is manufactured entirely from FDA compliant materials, ideal for food contact, residential and commercial use alike.

 

Capable of effectively reducing lead, mercury and cyst contaminants as well as an effective chlorine, taste, odour and premium grade sediment filter.

The cellulose-free fibre matrix results in higher reduction capacities that resist plugging, prolong life and feature the lowest pressure drop over the life of the cartridge. Due to the unique post filtration layer fused to the carbon/fibre matrix on all the Fibredyne family, this technology will not release fines into the effluent stream.

Manufactured entirely from FDA-compliant materials, the CFB-PB is an ideal choice for a wide range of commercial, industrial, food service and residential applications.

Fibredyne technology means that no pre-filtration is required for this 0.5 micron nominally rated filter.

Lead, mercury, cyst, chlorine, taste, odour and sediment reduction in one filter cartridge
Lead reduction capabilities of 7600 litres
Low density fibrous matrix creates greater void volume trapping more sediment without significant pressure drops
Water based manufacturing process creates ultra clean carbon, with very low extractables

The Primary Carbon for Electroplaters

A specialised cartridge for electroplating applications, the C-155 represents the best possible technology available for the marketplace. The bonded PAC used in the Fibredyne C-155 excels in removing organics and particulate and ensures sulphur is not leached into the plating bath, along with a post filtration layer preventing carbon fines after initial flushing. The C-155 prevents pitted deposits, haze, clouds and discolouration to provide a bright electroplating finish. Building on the same technology as the discontinued ELPC cartridge, the C-155 has a reduced diameter allowing simple retrofitting to a much wider range of standard housings within the finishing industry.

The C-155 carbon cartridges made with Fibredyne™ technology are far more advanced than traditional carbon block cartridges. Benefits of higher flow rates, lower pressure drops, higher treatment capacity and less susceptibility to premature blocking from sediment make them the leading carbon cartridges on the market.

The fibres (coated in powdered activated carbon) have a very large surface area to offer increased capacity, more flow paths to allow for increased flow and reduced pressure drop and also create areas where sediment can be trapped.

The construction methods used to manufacture Fibredyne™ cartridges allow for a variety of constituents to be incorporated that solve specific application problems. Manufacturing and development processes that produce no fines or Sulphur release, is a particular benefit in electroplating applications. Fibredyne™ technology also enables the use of moulded Santoprene gaskets, meaning no glues are used and the risk of end-caps being left in the housing during cartridge change is vastly reduced.

The Primary Carbon for Electroplaters

A specialised cartridge for electroplating applications, the C-155 represents the best possible technology available for the marketplace. The bonded PAC used in the Fibredyne C-155 excels in removing organics and particulate and ensures sulphur is not leached into the plating bath, along with a post filtration layer preventing carbon fines after initial flushing. The C-155 prevents pitted deposits, haze, clouds and discolouration to provide a bright electroplating finish. Building on the same technology as the discontinued ELPC cartridge, the C-155 has a reduced diameter allowing simple retrofitting to a much wider range of standard housings within the finishing industry.

The C-155 carbon cartridges made with Fibredyne™ technology are far more advanced than traditional carbon block cartridges. Benefits of higher flow rates, lower pressure drops, higher treatment capacity and less susceptibility to premature blocking from sediment make them the leading carbon cartridges on the market.

The fibres (coated in powdered activated carbon) have a very large surface area to offer increased capacity, more flow paths to allow for increased flow and reduced pressure drop and also create areas where sediment can be trapped.

The construction methods used to manufacture Fibredyne™ cartridges allow for a variety of constituents to be incorporated that solve specific application problems. Manufacturing and development processes that produce no fines or Sulphur release, is a particular benefit in electroplating applications. Fibredyne™ technology also enables the use of moulded Santoprene gaskets, meaning no glues are used and the risk of end-caps being left in the housing during cartridge change is vastly reduced.