Pentek CBC-20 Carbon Block 20 inch 0.5 Micron Sediment Filter

Pentair Pentek CBC Series Cartridges are highly effective at reducing unwanted bad taste & odor and chlorine taste & odor and other contaminants from potable drinking water.

CBC Series Cartridges are an ideal choice for a wide range of residential, food service, commercial and industrial applications. They also make excellent polishing filters or pre-filters in applications requiring fine filtration and high capacity.

Features and Benefits

• Reduces particles as small as 0.5 micron in size by mechanical means
• Premium high capacity bad taste & odor and chlorine taste & odor reduction
• Enhanced dirt-holding capacity

Pentair Pentek EPM Series Cartridges are a modified version of the EP Series Cartridge. An economical price makes this cartridge suitable for taste, odor and chlorine taste & odor reduction, as well as sediment filtration.

Pentair Pentek ChlorPlus carbon block cartridges help reduce sediment while providing greater chloramine performance capacities than granular carbon. They also significantly reduce the carbon fines found in many granular canisters.

With NSF/ANSI certified cyst, chlorine and sediment reduction, the FloPlus is one of the leading cartridges in its field. The FloPlus utilises Fibredyne media with a 0.5 micron rating that has a low pressure drop and flows like a 10 micron. Whilst Fibredyne media is effective at targeting sediment and the FloPlus can be used as a stand-alone solution, a 5 micron pre-filter is recommended to maximise life and performance of this cartridge.

The Primary Carbon for Electroplaters

A specialised cartridge for electroplating applications, the C-155 represents the best possible technology available for the marketplace. The bonded PAC used in the Fibredyne C-155 excels in removing organics and particulate and ensures sulphur is not leached into the plating bath, along with a post filtration layer preventing carbon fines after initial flushing. The C-155 prevents pitted deposits, haze, clouds and discolouration to provide a bright electroplating finish. Building on the same technology as the discontinued ELPC cartridge, the C-155 has a reduced diameter allowing simple retrofitting to a much wider range of standard housings within the finishing industry.

The C-155 carbon cartridges made with Fibredyne™ technology are far more advanced than traditional carbon block cartridges. Benefits of higher flow rates, lower pressure drops, higher treatment capacity and less susceptibility to premature blocking from sediment make them the leading carbon cartridges on the market.

The fibres (coated in powdered activated carbon) have a very large surface area to offer increased capacity, more flow paths to allow for increased flow and reduced pressure drop and also create areas where sediment can be trapped.

The construction methods used to manufacture Fibredyne™ cartridges allow for a variety of constituents to be incorporated that solve specific application problems. Manufacturing and development processes that produce no fines or Sulphur release, is a particular benefit in electroplating applications. Fibredyne™ technology also enables the use of moulded Santoprene gaskets, meaning no glues are used and the risk of end-caps being left in the housing during cartridge change is vastly reduced.

The latest in carbon technology, Pentair Fibredyne stands for best of both worlds: a range of cartridges that combine activated carbon technology with depth filtration. This allows all the benefits of activated carbon with minimum pressure drop, thanks to using powdered activated carbon embedded in a polyethylene matrix. With premium chlorine, taste and odour reduction, the CFB-Plus is a versatile cartridge, with the highest sediment reduction promoting a long life and the ideal, trusted choice for residential, commercial or industrial applications.

The latest in carbon technology, Pentair Fibredyne stands for best of both worlds: a range of cartridges that combine activated carbon technology with depth filtration. This allows all the benefits of activated carbon with minimum pressure drop, thanks to using powdered activated carbon embedded in a polyethylene matrix. With premium chlorine, taste and odour reduction, the CFB-Plus is a versatile cartridge, with the highest sediment reduction promoting a long life and the ideal, trusted choice for residential, commercial or industrial applications.

Pentek EP-20 Carbon Block

SOLD IN BOX QUANTITY ONLY - (in increments of 6 units)

An extension to the EPM range is the NSF 42 certified EP, offering 100% greater removal capacity for only a 10% average increase in cost.

EP Series carbon briquette cartridges are manufactured using a patented process that yields a cartridge with a nominal 5-micron filtration rating, high dirt-holding tolerance. A high porosity design helps prevent the cartridge from plugging before its adsorption capacity is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop.

These cartridges are protected by Endurawrap®, a uniquely formulated polyolefin bilaminate pre-filter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.

Available in 5", 10" (9 3/4"), 20", 30" and 40".  Please call us for volume discounts on these or any other filters

Pentek CFBC 10" Modified Carbon Filter

The CFBC uses Fibredyne technology to achieve the best in cyst and chlorine reduction with the additional advantage of sediment reduction.

Tested and certified to NSF/ANSI Standard 42, the CFBC is manufactured entirely from FDA compliant materials, ideal for food contact, residential and commercial use alike.

Available in 10" (9 3/4") and 20" sizes.

The WS series of water softening cartridges are an effective and efficient solution for point-of-use applications that benefit from ease of installation and changeouts.

Designed to trap and reduce hardness and scale deposits the WS range is an excellent solution for exact point-of-use applications. These cation exchange softening cartridges use a bed of FDA compliant insoluble resin beads to reduce hardness by replacing calcium ions for sodium ones, thereby eliminating the hardness and scale deposit buildups.

Available in three different capacities and flow rates, the convenient and space-saving design of the WS series means softened water can be provided easily and cost effectively at the exact point of need.

This 10" cartridge is designed to fit into any standard 10" housing.