John Guest Tubing is WRAS approved for potable liquid applications, including for drinking water, water coolers and dispensing or vending. Manufactured from linear low density Polyethylene (LLDPE) for its non-contaminating properties and durability, available by the 1 metre (minimum 2m lengths) to suit either 1/4″ or 3/8″ tube diameters.

We stock flexible tubing to suit either 1/4″ or 3/8″ diameters, for connection to your choice of push fitting. When paired with a John Guest push fitting, this tubing offers a reliable, semi-permanent alternative to hard plumbing. Orders for more than 1 metre will be cut on a continuous roll unless specified.  Minimum quantity 2 meters. Please enter no. of meters required in qty.

DO NOT INSTALL NEAR HOT WATER PIPES - WHEN EXPOSED TO HIGH TEMPERATURE THE INTEGRITY CAN BE COMPROMISED AND RESULT IN BURSTING

These top quality rubber hoses covered with stainless steel braiding are not only more robust than the plastic hoses but are also more flexible which is especially useful when installing in a confined space (e.g. under a kitchen sink). Virtually indistrcutable, these hoses will last for years.

For use with 15mm installations they have an elbow connection at both ends with 3/4" bsp nuts. All connections are nickel plated brass. Four washers are included with each pair of hoses.

Select lengths from 0.5m, 0.75m, 1.0m, 1.25m, or 1.5m

PLEASE NOTE: Length stated is the pipe length without the connectors. Please allow approx. +10cm for the connectors.

These top quality rubber hoses covered with stainless steel braiding are not only more robust than the plastic hoses but are also more flexible which is especially useful when installing in a confined space (e.g. under a kitchen sink). Virtually indistrcutable, these hoses will last for years.

For use with 15mm installations they have an elbow connection at one end and straight connector at the other, both with 3/4" bsp nuts. All connections are nickel plated brass. Four washers are included with each pair of hoses.

Select lengths from 0.5m, 0.75m, 1.0m, 1.25m, or 1.5m

PLEASE NOTE: Length stated is the pipe length without the connectors. Please allow approx. +10cm for the connectors.

With 3/4" Connections

These top quality rubber hoses covered with stainless steel braiding are not only more robust than the plastic hoses but are also more flexible which is especially useful when installing in a confined space (e.g. under a kitchen sink). Virtually indistrcutable, these hoses will last for years.

For use with 15mm or 22mm installations, these High Flow hoses have an elbow connection at both ends with 3/4" bsp nuts. All connections are nickel plated brass. Four washers are included with each pair of hoses.

Select lengths from 0.5m, to 2m.

PLEASE NOTE: Length stated is the pipe length without the connectors. Please allow approx. +10cm for the connectors.

With 3/4" Connections

These top quality rubber hoses covered with stainless steel braiding are not only more robust than the plastic hoses but are also more flexible which is especially useful when installing in a confined space (e.g. under a kitchen sink). Virtually indistrcutable, these hoses will last for years.

For use with 15mm or 22mm installations, these High Flow hoses have an elbow connection at one end and straight connector at the other, both with 3/4" bsp nuts. All connections are nickel plated brass. Four washers are included with each pair of hoses.

Select lengths from 0.5m, to 2m.

PLEASE NOTE: Length stated is the pipe length without the connectors. Please allow approx. +10cm for the connectors.

John Guest Tubing is WRAS approved for potable liquid applications, including for drinking water, water coolers and dispensing or vending. Manufactured from linear low density Polyethylene (LLDPE) for its non-contaminating properties and durability, available by the 1 metre (minimum 2m lengths) to suit either 1/4″ or 3/8″ tube diameters.

We stock flexible tubing to suit either 1/4″ or 3/8″ diameters, for connection to your choice of push fitting. When paired with a John Guest push fitting, this tubing offers a reliable, semi-permanent alternative to hard plumbing. Orders for more than 1 metre will be cut on a continuous roll unless specified.  Minimum quantity 2 meters. Please enter no. of meters required in qty.

DO NOT INSTALL NEAR HOT WATER PIPES - WHEN EXPOSED TO HIGH TEMPERATURE THE INTEGRITY CAN BE COMPROMISED AND RESULT IN BURSTING