John Guest PI1212S Bulkhead Connector 3/8 inch Push Fit x 3/8 inch Push Fit
This Bulkhead Union 3/8" by 3/8" is part of the John Guest Range of Drinking Water System components – Part No. PI1212S. It enables a tube of 3/8 inches to be safely secured through a wall.

John Guest Tubing is WRAS approved for potable liquid applications, including for drinking water, water coolers and dispensing or vending. Manufactured from linear low density Polyethylene (LLDPE) for its non-contaminating properties and durability, available by the 1 metre (minimum 2m lengths) to suit either 1/4″ or 3/8″ tube diameters.

We stock flexible tubing to suit either 1/4″ or 3/8″ diameters, for connection to your choice of push fitting. When paired with a John Guest push fitting, this tubing offers a reliable, semi-permanent alternative to hard plumbing. Orders for more than 1 metre will be cut on a continuous roll unless specified.  Minimum quantity 2 meters. Please enter no. of meters required in qty.

DO NOT INSTALL NEAR HOT WATER PIPES - WHEN EXPOSED TO HIGH TEMPERATURE THE INTEGRITY CAN BE COMPROMISED AND RESULT IN BURSTING

John Guest Tubing is WRAS approved for potable liquid applications, including for drinking water, water coolers and dispensing or vending. Manufactured from linear low density Polyethylene (LLDPE) for its non-contaminating properties and durability, available by the 1 metre (minimum 2m lengths) to suit either 1/4″ or 3/8″ tube diameters.

We stock flexible tubing to suit either 1/4″ or 3/8″ diameters, for connection to your choice of push fitting. When paired with a John Guest push fitting, this tubing offers a reliable, semi-permanent alternative to hard plumbing. Orders for more than 1 metre will be cut on a continuous roll unless specified.  Minimum quantity 2 meters. Please enter no. of meters required in qty.

DO NOT INSTALL NEAR HOT WATER PIPES - WHEN EXPOSED TO HIGH TEMPERATURE THE INTEGRITY CAN BE COMPROMISED AND RESULT IN BURSTING

John Guest Speedfit Straight Adaptor 1/4" Push Fit  x 3/8" NPTF Thread
This Speedfit Straight Adaptor 1/4" Push Fit  x 3/8" NPTF Thread is part of the John Guest Range of Drinking Water System components – JG Part No. PI010823S.
The adaptor is suitable to use with Everpure QL3 Heads and BW (DW) Cartridge Range Heads.

• JG Part No. PI011202S
• Push-fit technology
• Quick disconnection without the need for tools
• High chemical resistance 
• Food Quality and suitable for potable liquids and pure water applications
• Not suitable for compressed air and vacuum applications
• Quick Connector with 1/4" Thread and 3/8" Push Fit

• JG 1/4" Push Fit Elbow White
• JG Part No. CI0308W
• For use with 1/4" drinking line.

• Push-fit technology
• Quick disconnection without the need for tools
• High chemical resistance 
• Food Quality and suitable for potable liquids and pure water applications
• Not suitable for compressed air and vacuum applications
• Quick Connector with 3/8" BSPT Thread and 3/8" Push Fit
• Suitable for use with Pentek Slimline Housing with 3/8 Ports

• JG Part No. PI011223S
• Push-fit technology
• Quick disconnection without the need for tools
• High chemical resistance 
• Food Quality and suitable for potable liquids and pure water applications
• Not suitable for compressed air and vacuum applications
• Quick Connector with 3/8" Thread and 3/8" Push Fit
• Suitable for use with Everpure QL3 Heads and BW (DW) Cartridge range Heads

• John Guest 3/8" Push Fit Stem Elbow Grey
• Pack of 2

• John Guest 3/8" Stem x 3/8" Push Fit Stem Elbow
• John Guest Stem Elbow which is produced in a grey acetal copolymer making it especially suitable for applications involving potable liquids and foodstuffs for use with 3/8" drinking line
• Code PI221212S
•  

John Guest Push Fit Angle Stop Valve 15mm x 15mm x 1/4" Branch
This ASV3 Push Fit Angle Stop Valve 15mm x 15mm x 1/4" is part of the John Guest Range of Drinking Water System components – JG Part no. ASV3. It is an alternative fitment to the Self Piercing Saddle Valves and is suitable for both 15mm copper pipes and 15mm plastic pipes. It is easy to assemble and is also reusable.

John Guest Push-Fit Angle Stop Valve 15mm x 15mm x 3/8" Branch
This ASV4 Push Fit Angle Stop Valve 15mm x 15mm x 3/8" is part of the John Guest Range of Drinking Water System components – JG Part No. ASV4. It is an alternative fitment to the Self Piercing Saddle Valves and is suitable for both 15mm copper pipes and 15mm plastic pipes. It is easy to assemble and is also reusable.

A Set of 5 locking or unlocking tools suitable for the John Guest Pushfit range of fittings. Size range from 3/16" yo 1/2" and supplied on a handy keyring.

• 3/16"
• 1/4"
• 5/16"
• 3/8"
• 1/2"

John Guest Push Fit Equal Elbow 3/8in x 3/8in
This Push Fit Equal Elbow 3/8” x 3/8” is part of the John Guest Range of Drinking Water System components. - JG Part No. CI0312W CH It allows drinking water tubing of 3/8 inch to be joined together in an Elbow configuration. The Push Fit assembly enables the task to be quick and easy.

John Guest Push-Fit Equal Straight Coupler 3/8" x 3/8"
This Push Fit Equal Straight Coupler 3/8" x 3/8" is part of the John Guest Range of Drinking Water System components – JG Part No. CI0412W CH. If you require your 3/8 inch water pipe to be longer there is no need to change your existing water pipe for a longer piece; this fitting will allow you to extend your existing water pipe with another piece of 3/8" water pipe.

John Guest Push-Fit Equal Straight Connector 1/4" by 1/4"
This Push Fit Equal Straight Connector 1/4" x 1/4" is part of the John Guest Range of Drinking Water System components – JG Part No. CI0408W CH. If you require your 1/4 inch water pipe to be longer there is no need to change your existing water pipe for a longer piece; this fitting will allow you to extend your existing water pipe with another piece of 1/4" water pipe.

John Guest Push Fit Equal Tee 1/4" x 1/4" x 1/4"
This Push Fit Equal Tee 1/4" x 1/4" x 1/4" is part of the John Guest Range of Drinking Water System components – JG Part no. CI0208W CH. It allows a branch to be taken from your drinking water system to your fridge, ice-maker or coffee machine.

John Guest Push Fit Union Tee 3/8" x 3/8" x 3/8"
This Push Fit Equal Tee 3/8" x 3/8" x 3/8" is part of the John Guest Range of Drinking Water System components – JG Part No. CI0212W CH. It allows a branch to be taken from your drinking water system to your fridge, ice-maker or coffee machine.

John Guest Female Connector 1/4" OD Tube x 1/4" NPTF Thread Flat End
This Female Connector is part of the John Guest Range of Drinking Water System components – JG Part No. PI450822S. It fits to a standard 1/4in NPTF Thread – Flat End and enables the attachment of a 1/4in Drinking Water Tube.

John Guest Female Adapter 3/8 inch Tube x 1/2 inch BSP Thread - SOLD IN PACK OF 5
This Female Adaptor is part of the John Guest Range of Drinking Water System components – It fits to a standard 1/2in Thread BSP and enables the attachment of a 3/8in Drinking Water Tube.