John Guest PI1212S Bulkhead Connector 3/8 inch Push Fit x 3/8 inch Push Fit
This Bulkhead Union 3/8" by 3/8" is part of the John Guest Range of Drinking Water System components – Part No. PI1212S. It enables a tube of 3/8 inches to be safely secured through a wall.

 EPDM O-ring for 20" Prism & Spectrum Housing
O-rings, seals and gaskets are often overlooked yet essential parts within filtration equipment. Key to ensuring a positve seal between different apparatus, reducing leakage potential in housings or providing exact postioning of a filter these accessories should be checked regularly as part of a diligent maintenance schedule.

Please enter the number of meters required in Qty

High quality flexible 1/4" tubing used for drinking water systems or drainage tubing for some water softeners. This tubing is specially made with a high performance, anti-bacterial hytrel liner. 

DO NOT INSTALL NEAR HOT WATER PIPES - WHEN EXPOSED TO HIGH TEMPERATURE THE INTEGRITY CAN BE COMPROMISED AND RESULT IN BURSTING

These top quality rubber hoses covered with stainless steel braiding are not only more robust than the plastic hoses but are also more flexible which is especially useful when installing in a confined space (e.g. under a kitchen sink). Virtually indistrcutable, these hoses will last for years.

For use with 15mm installations they have an elbow connection at both ends with 3/4" bsp nuts. All connections are nickel plated brass. Four washers are included with each pair of hoses.

Select lengths from 0.5m, 0.75m, 1.0m, 1.25m, or 1.5m

These top quality rubber hoses covered with stainless steel braiding are not only more robust than the plastic hoses but are also more flexible which is especially useful when installing in a confined space (e.g. under a kitchen sink). Virtually indistrcutable, these hoses will last for years.

For use with 15mm installations they have an elbow connection at one end and straight connector at the other, both with 3/4" bsp nuts. All connections are nickel plated brass. Four washers are included with each pair of hoses.

Select lengths from 0.5m, 0.75m, 1.0m, 1.25m, or 1.5m

Accessories

Connecting to healthcare taps is critical to ensure no bypass which can encourage bacteria growth. The MTF-TA24-S/S have been successfully fitted to the following makes and ranges of tap – Horne, Armitage Shanks (Markwik & Contour), Delabie, Grohe and Twyford. The MTF-TA18-S/S was specifically developed for use with Kohler Mira’s RADA ACU range. Both adaptors are manufactured from 316L stainless steel, they can be autoclaved and re-used once the O-rings are replaced.

The MTF-TAU is universal and designed for use with any sanitary tap.

Accessories

Connecting to healthcare taps is critical to ensure no bypass which can encourage bacteria growth. The MTF-TA24-S/S have been successfully fitted to the following makes and ranges of tap – Horne, Armitage Shanks (Markwik & Contour), Delabie, Grohe and Twyford. The MTF-TA18-S/S was specifically developed for use with Kohler Mira’s RADA ACU range. Both adaptors are manufactured from 316L stainless steel, they can be autoclaved and re-used once the O-rings are replaced.

The MTF-TAU is universal and designed for use with any sanitary tap.

With 3/4" Connections

These top quality rubber hoses covered with stainless steel braiding are not only more robust than the plastic hoses but are also more flexible which is especially useful when installing in a confined space (e.g. under a kitchen sink). Virtually indistrcutable, these hoses will last for years.

For use with 15mm or 22mm installations, these High Flow hoses have an elbow connection at both ends with 3/4" bsp nuts. All connections are nickel plated brass. Four washers are included with each pair of hoses.

Select lengths from 0.5m, to 2m.

With 3/4" Connections

These top quality rubber hoses covered with stainless steel braiding are not only more robust than the plastic hoses but are also more flexible which is especially useful when installing in a confined space (e.g. under a kitchen sink). Virtually indistrcutable, these hoses will last for years.

For use with 15mm or 22mm installations, these High Flow hoses have an elbow connection at one end and straight connector at the other, both with 3/4" bsp nuts. All connections are nickel plated brass. Four washers are included with each pair of hoses.

Select lengths from 0.5m, to 3m.

Accessories

Connecting to healthcare taps is critical to ensure no bypass which can encourage bacteria growth. The MTF-TA24-S/S have been successfully fitted to the following makes and ranges of tap – Horne, Armitage Shanks (Markwik & Contour), Delabie, Grohe and Twyford. The MTF-TA18-S/S was specifically developed for use with Kohler Mira’s RADA ACU range. Both adaptors are manufactured from 316L stainless steel, they can be autoclaved and re-used once the O-rings are replaced.

The MTF-TAU is universal and designed for use with any sanitary tap.

Accessories

Connecting to healthcare taps is critical to ensure no bypass which can encourage bacteria growth. The MTF-TA24-S/S have been successfully fitted to the following makes and ranges of tap – Horne, Armitage Shanks (Markwik & Contour), Delabie, Grohe and Twyford. The MTF-TA18-S/S was specifically developed for use with Kohler Mira’s RADA ACU range. Both adaptors are manufactured from 316L stainless steel, they can be autoclaved and re-used once the O-rings are replaced.

The MTF-TAU is universal and designed for use with any sanitary tap.

25mm stainless hoses - straight x bent - 1.5M

1" hoses for larger softners. These are 25mm bore with 1" connections and supplies with fibre washers.

Please enter the number of meters required in Qty

High quality flexible tubing used for drinking water systems or drainage tubing for some water softeners. This tubing is specially made with a high performance, anti-bacterial hytrel liner. 3/8 inch tubing is recommended for drinking water taps to increase flow rate as apposed to 1/4 inch.

DO NOT INSTALL NEAR HOT WATER PIPES - WHEN EXPOSED TO HIGH TEMPERATURE THE INTEGRITY CAN BE COMPROMISED AND RESULT IN BURSTING

This bracket can be used for Slimline and Standard 10in and 20in Housings. It comes complete with the relevant securing screws.

Byotrol Surface Sanitiser, 750ml Spray

Regular sanitising of beverage and dispensing equipment is necessary to ensure protection against bacteria build up. Byotrol used on a regular basis will ensure continual protection at minimal cost.

Accessories

Connecting to healthcare taps is critical to ensure no bypass which can encourage bacteria growth. The MTF-TA24-S/S have been successfully fitted to the following makes and ranges of tap – Horne, Armitage Shanks (Markwik & Contour), Delabie, Grohe and Twyford. The MTF-TA18-S/S was specifically developed for use with Kohler Mira’s RADA ACU range. Both adaptors are manufactured from 316L stainless steel, they can be autoclaved and re-used once the O-rings are replaced.

The MTF-TAU is universal and designed for use with any sanitary tap.

John Guest Speedfit Straight Adaptor 1/4" Push Fit  x 3/8" NPTF Thread
This Speedfit Straight Adaptor 1/4" Push Fit  x 3/8" NPTF Thread is part of the John Guest Range of Drinking Water System components – JG Part No. PI010823S.
The adaptor is suitable to use with Everpure QL3 Heads and BW (DW) Cartridge Range Heads.

• JG Part No. PI011202S
• Push-fit technology
• Quick disconnection without the need for tools
• High chemical resistance 
• Food Quality and suitable for potable liquids and pure water applications
• Not suitable for compressed air and vacuum applications
• Quick Connector with 1/4" Thread and 3/8" Push Fit

• JG 1/4" Push Fit Elbow White
• JG Part No. CI0308W
• For use with 1/4" drinking line.

• Push-fit technology
• Quick disconnection without the need for tools
• High chemical resistance 
• Food Quality and suitable for potable liquids and pure water applications
• Not suitable for compressed air and vacuum applications
• Quick Connector with 3/8" BSPT Thread and 3/8" Push Fit
• Suitable for use with Pentek Slimline Housing with 3/8 Ports

• JG Part No. PI011223S
• Push-fit technology
• Quick disconnection without the need for tools
• High chemical resistance 
• Food Quality and suitable for potable liquids and pure water applications
• Not suitable for compressed air and vacuum applications
• Quick Connector with 3/8" Thread and 3/8" Push Fit
• Suitable for use with Everpure QL3 Heads and BW (DW) Cartridge range Heads