Spectrum Premier Pleat Depth Polypropylene Particle Retention Efficiency

The PPDP range is a product development on the popular SPECTRUM Premier Pleat. Designed to combine the science of depth filtration within a pleat format, this increase in layered media and cartridge construction allows for a higher dirt holding capacity over standard pleated cartridges. The PPDP is ideal for applications targeting a wider range of particulate size and those of a softer, more gelatinous form.
 

Many applications benefit from using the high efficiency, large surface area, low pressure drop and inert properties of the WRAS approved Premier Pleat Polypropylene cartridge. Four pleated media layers combine to construct a pleat pack with depth characteristics and the main filtration media layer delivers high efficiency and exacting micron classification. An improved cage construction for 2018 delivers excellent flow dynamics and is designed to protect the integral pleat pack whilst providing overall rigidity and strength to the cartridge.
 

 

The most popular wound cartridge media by far, the SPECTRUM wound polypropylene offers broad chemical compatibility and good temperature resistance at low cost. With over 50 years proven experience and in a variety of micron sizes, across standard and large diameters, the SWP provides a basic filtration solution perfectly suited for first-stage and general particulate reduction. Whilst newer spun technologies offer higher efficiency and longer life cartridges, wounds still exceed filtration standards in many applications.

These smart systems have been conveniently pre-assembled for easy and quick installation. Costing less than the sum of their individual components combined, the Prism Aqualyze systems are anything but economic in their construction and are available in 10" and 20" Regular and Large Diameter sizes, with the unique option to select sump colour configurations.

Coming complete with inlet and outlet gauges to monitor and maximise cartridge life, a spanner to assist with sump removal when performing maintenance and cartridge replacement and connectors to configure the 1/4” to 3/4" port sizes with the most common pipework, the extensive combinations in this range provide endless options for applications and flow rates.

Key Features
• Complete packaged systems including all necessary accessories for installation and monitoring
• Full array of housing sizes and sump configurations to suit almost all application requirements
• Ergonomic and lightweight housings allow easy installation
• Packaged in sturdy boxes that easily stack on a pallet
• Available in Regular or Large Diameter
• Screws included for wall mounting

These smart systems have been conveniently pre-assembled for easy and quick installation. Costing less than the sum of their individual components combined, the Prism Aqualyze systems are anything but economic in their construction and are available in 10" and 20" Regular and Large Diameter sizes, with the unique option to select sump colour configurations.

Coming complete with inlet and outlet gauges to monitor and maximise cartridge life, a spanner to assist with sump removal when performing maintenance and cartridge replacement and connectors to configure the 1/4” to 3/4" port sizes with the most common pipework, the extensive combinations in this range provide endless options for applications and flow rates.

Key Features
• Complete packaged systems including all necessary accessories for installation and monitoring
• Full array of housing sizes and sump configurations to suit almost all application requirements
• Ergonomic and lightweight housings allow easy installation
• Packaged in sturdy boxes that easily stack on a pallet
• Available in Regular or Large Diameter
• Screws included for wall mounting

These smart systems have been conveniently pre-assembled for easy and quick installation. Costing less than the sum of their individual components combined, the Prism Aqualyze systems are anything but economic in their construction and are available in 10" and 20" Regular and Large Diameter sizes, with the unique option to select sump colour configurations.

Coming complete with inlet and outlet gauges to monitor and maximise cartridge life, a spanner to assist with sump removal when performing maintenance and cartridge replacement and connectors to configure the 1/4” to 3/4" port sizes with the most common pipework, the extensive combinations in this range provide endless options for applications and flow rates.

Key Features
• Complete packaged systems including all necessary accessories for installation and monitoring
• Full array of housing sizes and sump configurations to suit almost all application requirements
• Ergonomic and lightweight housings allow easy installation
• Packaged in sturdy boxes that easily stack on a pallet
• Available in Regular or Large Diameter
• Screws included for wall mounting

Also within the PRISM housing portfolio is the Core plastic housing range. Having taken key features from the marketplace and improved them accordingly, these housings meet the needs of economy, quality and ease-of-use. This new range rivals higher priced competitors in the industry without compromising materials or calibre. Evident in the housings test criteria, their flexible configurations using brackets and adaptors encourages easy-to-build systems. Housings come in either opaque or clear options with 1/4" to 1" ports and lengths of 10" and 20". The most sought-after housings with three port sizes allow for different fittings and pipework. The 1/4" port is typically paired with push-fit fittings and flexible tubing, ideal for OEM systems and drinking water under-sink installations. The 1/2" and 3/4" port sizes are compatible with standard inline pipe installations. Brackets and connectors allow for easy system builds.

This is for the  1/4" , 3/8", 1/2" and  3/4" port sizes which are compatible with standard inline pipe installations. Brackets and connectors allow for easy system builds.

(Alternative to Pentek/Pentair Housing)

Also within the PRISM housing portfolio is the Core plastic housing range. Having taken key features from the marketplace and improved them accordingly, these housings meet the needs of economy, quality and ease-of-use. This new range rivals higher priced competitors in the industry without compromising materials or calibre. Evident in the housings test criteria, their flexible configurations using brackets and adaptors encourages easy-to-build systems. Housings come in either opaque or clear options with 1/4" to 1" ports and lengths of 10" and 20". The most sought-after housings with three port sizes allow for different fittings and pipework. The 1/4" port is typically paired with push-fit fittings and flexible tubing, ideal for OEM systems and drinking water under-sink installations. The 1/2" and 3/4" port sizes are compatible with standard inline pipe installations. Brackets and connectors allow for easy system builds.

This is for the  1/4" , 3/8", 1/2" and  3/4" port sizes which are compatible with standard inline pipe installations. Brackets and connectors allow for easy system builds.

(Alternative to Pentek/Pentair Housing)

These smart PRISM systems have been conveniently pre-assembled for easy and quick installation. Costing less than the sum of their individual components combined, the core filter housing systems are anything but economic and are available in 10" and 20" Regular and Large Diameter sizes, with the unique option to select system sump colour. Coming complete with inlet and outlet gauges to monitor and maximise cartridge life, a spanner to assist with sump removal when performing maintenance and cartridge replacement and connectors to configure the 1/4"-1" port sizes with the most common pipework, the extensive combinations in this range provide endless options for applications and flow rates. Filtration systems are tailored to suit individual applications dependant on the level of filtration required. Single housings provide an effective one stage process, used to target specific contaminants for example, bulk solids, sediment or organics. Two-stage systems are implemented when an expensive secondary filter, such as a fine filtration or water treatment cartridge, benefits from prefiltration, prolonging service life. If applications demand a full filtration cascade, a three-stage system is recommended, which delivers a spatial and economic solution.

Key Features
• Complete packaged systems including all necessary accessories for installation and monitoring
• Full array of housing sizes and sump configurations to suit almost all application requirements
• Ergonomic and lightweight housings allow easy installation
• Packaged in sturdy boxes that easily stack on a pallet
• Available in Regular or Large Diameter
• Screws included for wall mounting

These smart PRISM systems have been conveniently pre-assembled for easy and quick installation. Costing less than the sum of their individual components combined, the core filter housing systems are anything but economic and are available in 10" and 20" Regular and Large Diameter sizes, with the unique option to select system sump colour. Coming complete with inlet and outlet gauges to monitor and maximise cartridge life, a spanner to assist with sump removal when performing maintenance and cartridge replacement and connectors to configure the 1/4"-1" port sizes with the most common pipework, the extensive combinations in this range provide endless options for applications and flow rates. Filtration systems are tailored to suit individual applications dependant on the level of filtration required. Single housings provide an effective one stage process, used to target specific contaminants for example, bulk solids, sediment or organics. Two-stage systems are implemented when an expensive secondary filter, such as a fine filtration or water treatment cartridge, benefits from prefiltration, prolonging service life. If applications demand a full filtration cascade, a three-stage system is recommended, which delivers a spatial and economic solution.

Key Features
• Complete packaged systems including all necessary accessories for installation and monitoring
• Full array of housing sizes and sump configurations to suit almost all application requirements
• Ergonomic and lightweight housings allow easy installation
• Packaged in sturdy boxes that easily stack on a pallet
• Available in Regular or Large Diameter
• Screws included for wall mounting

These smart PRISM systems have been conveniently pre-assembled for easy and quick installation. Costing less than the sum of their individual components combined, the core filter housing systems are anything but economic and are available in 10" and 20" Regular and Large Diameter sizes, with the unique option to select system sump colour. Coming complete with inlet and outlet gauges to monitor and maximise cartridge life, a spanner to assist with sump removal when performing maintenance and cartridge replacement and connectors to configure the 1/4"-1" port sizes with the most common pipework, the extensive combinations in this range provide endless options for applications and flow rates. Filtration systems are tailored to suit individual applications dependant on the level of filtration required. Single housings provide an effective one stage process, used to target specific contaminants for example, bulk solids, sediment or organics. Two-stage systems are implemented when an expensive secondary filter, such as a fine filtration or water treatment cartridge, benefits from prefiltration, prolonging service life. If applications demand a full filtration cascade, a three-stage system is recommended, which delivers a spatial and economic solution.

Key Features
• Complete packaged systems including all necessary accessories for installation and monitoring
• Full array of housing sizes and sump configurations to suit almost all application requirements
• Ergonomic and lightweight housings allow easy installation
• Packaged in sturdy boxes that easily stack on a pallet
• Available in Regular or Large Diameter
• Screws included for wall mounting

These smart PRISM systems have been conveniently pre-assembled for easy and quick installation. Costing less than the sum of their individual components combined, the core filter housing systems are anything but economic and are available in 10" and 20" Regular and Large Diameter sizes, with the unique option to select system sump colour. Coming complete with inlet and outlet gauges to monitor and maximise cartridge life, a spanner to assist with sump removal when performing maintenance and cartridge replacement and connectors to configure the 1/4"-1" port sizes with the most common pipework, the extensive combinations in this range provide endless options for applications and flow rates. Filtration systems are tailored to suit individual applications dependant on the level of filtration required. Single housings provide an effective one stage process, used to target specific contaminants for example, bulk solids, sediment or organics. Two-stage systems are implemented when an expensive secondary filter, such as a fine filtration or water treatment cartridge, benefits from prefiltration, prolonging service life. If applications demand a full filtration cascade, a three-stage system is recommended, which delivers a spatial and economic solution.

Key Features
• Complete packaged systems including all necessary accessories for installation and monitoring
• Full array of housing sizes and sump configurations to suit almost all application requirements
• Ergonomic and lightweight housings allow easy installation
• Packaged in sturdy boxes that easily stack on a pallet
• Available in Regular or Large Diameter
• Screws included for wall mounting

This is a Top Quality Twin Housing unit, supplied with robust metal bracket and spanner. The bowls feature a twin O ring seal for long life and an assured water tight seal by just a hand tighten. Suitable for any 10in classified filter inserts.

10in Twin Housing with 1/4in Push Fit Ports:
An ideal replacement for Liff RLK and RBK systems.

10in Twin Housing with 3/8in Push Fit Ports:
Ideal to connect to an existing cold tap, as 3/8in ports allow greater flows for this type of application.

10in Twin Housing with 1/2in Push Fit Ports:
These fittings are manufactured in gray acetal copolymer with food grade nitrile O-ring, making them especially suitable for applications involving foodstuff and potable liquids.

Manufactured using German engineered and produced high quality polyethersulfone media, the PRISM Max grade pleat provides assured and certified absolute bacteria retention characteristics. Lot coded and 100% individually tested, the high surface area media contains no adhesives or binders, with low extractable content offering consistent final product quality. Meeting industry standard requirements, the cartridges are FDA Title 21 Compliant and meet USP Class VI-121 DegC Plastics.

For applications with a higher operating temperature or where polypropylene is incompatible with the feed solution, the DWCO cartridge provides graded particulate reduction and is supplied as standard with a stainless steel core for added strength. Due to the natural absorption properties of the cotton media, the DWCO exhibits the ability to remove and retain dispersed oil making it suitable for use in degreasing applications.

SPECTRUM 870 range of activated carbon block cartridges treat water by removing the bad taste, odour and appearance associated with chemical and organic pollutants

Contaminants such as chlorine, chloramine, herbicides, solvents, dyes are all treated along with the removal of organics through absorption. To satisfy the requirements of different water treatment applications, SPECTRUM 870 range includes 3 grades – Economic, Standard and Premier. Choosing the grade that is most suited to the application is influenced by the water source’s levels and types of pollutants combined with the desired purity and cartridge life.

Economic - Chlorine, chemical and organic taste, odour and appearance removal

The PRISM Max grade carbon block is specifically formulated for effective chloramine control and the only cartridge to offer this feature within the range. Having been manufactured within a five-stage process, this exceptional catalytic activated carbon cartridge offers up to 10 times the capacity of the Plus grade. Essential for use in public water supplies where chloramine has been added as the disinfecting agent of choice, the Max grade carbon block will typically be found within applications including aquatics and renal dialysis. Rated at one micron, pre-filtration from the PRISM spun range, such as the Plus grade DSPP at five micron, is recommended to maximise service life and prevent premature blocking.

The Eco 3P 10" Filter Housing

The ECO 3P10" Housing represents excellent value for money. This high quality housing comes in a choice of Blue or Clear bowl. Clear Bowl option is available with 3/4" ports or 1" Ports and Blue Bowl with 1" ports only.

Made from PET, a highly recyclable plastic combined with highly efficient production methods makes this housing up to 60% more Eco friendly to produce than similar products on the market. With the Wassermann Eco P3 you not only get a high quality, great value product but also contribute to a greener planet at the same time!

• Quality 10 inch housing
• 3/4" or 1" BSP inlet/outlet ports with Clear bowl
• Includes fixing bracket and wrench
• Choice of Clear or Blue bowl

A range of selfcleaning filters with innovative solutions for the efficiency of selfcleaning operations, thanks to a newly designed back-wash system in a counter-current which grants the highest particle removal from the filter cartridge.

Liff Compatible MX1 10" Carbon Water Filter Cartridge

This Liff Compatible MX1 Carbon Water Filter designed to filter out chlorine, bad taste & odour as well as removing organic chemicals & pesticides will fit the Liff NCP1, NP1 & NDL2 units as well as any 10in cartridge housing.

Sediment removed down to 5 microns with a capacity of 10 L/Min. Life expectancy of 6 months