Wassermann Water Softeners are proud to offer an exclusive, British Made, range of Non Electric Water Softeners. Made to highest specification and performance they offer the lowest running cost of any Non-Electric Softener. Without the need for routine servicing, it makes the total cost of ownership very attractive compared to Single Tank, Electric Softeners. Working on water pressure, the unique Turbine Meter accurately monitors your water consumption, enabling the regeneration to initiate after you have consumed the designated amount of water. This ensures that you get the maximum throughput with the least amount of salt and water consumption. If you are away, then the machine waits patiently for your return and will only regenerate when the water is being used. Non Electric Machines have no clocks to set, no problems with power cuts, just keep it supplied with salt. It's as simple as that.
Select a Fixing Kit if required which includes all of the fittings that you need to install a water softener on a 15mm, 22mm or 28mm direct or indirect system.
Dimensions: Water Softener: H: 500mm D: 440mm W: 250mm
Salt Tank: H: 470mm W: 440mm D: 250mm
Technical Specifications: Connections: inlet = 1" or 3/4" bsp male parallel outlet = 1" or 3/4" bsp male parallel overflow = 1/2" hose connector drain = 1/2" Hose Connector Operating Conditions: Maximum operating water pressure = 8 bar Minimum operating water pressure = 1 bar (with water flowing) Maximum operating water temperature = 20°C Minimum operating water temperature = protect from freezing Type of salt – tablets
Operating Data: Salt used per regeneration Adjustable from 600g. 900g and 1300g Maximum flow = 80 l/min Minimum flow = > 10 l/hour Regeneration water volume = 37 to 50 litres depending on settings Flow rate to drain = 1.8 l/min Regeneration Time approx 20 mins